TANDBERG TELEPRESENCE MOVI 4.1 - FOR MAC OS X User Manual - Settings
Settings
Cisco TelePresence Movi for Windows User Guide (4.1)
Page 6 of 20
Settings
Movi comes with predefined settings that should work out of the box for most users.
The Settings button
in the Movi control window brings up the
Settings
dialog.
Remember to store changes to settings by clicking OK when you are done.
Automatic startup
By default Movi starts up when you log on to Windows.
Select the Start Cisco TelePresence Movi at Windows logon check box to change this setting.
Video resolution
The video resolution will always be the highest resolution available to you with the resources available.
If Movi detects that it is using too high a share of your system resources, the resolution will be lowered
automatically.
Note: Your IT administrator may limit the video resolution options available to you.
Network
If you experience low video quality, for example jitter, lowering the bandwidth can be helpful.
If you know that more bandwidth than the default setting is available, you may increase the bandwidth
setting for better video quality.
Note: Your IT administrator may limit the bandwidth options available to you.
Notifications and ring tone
You can decide when and how Movi shall notify you when calls come through.
To change the ringtone, follow these steps:
1. Use the drop-down menu and select one of the alternatives.
2. Listen to the tone by clicking the Play button. Note that you must stop one ring tone before you can try
another.
3. Click OK when you are happy with your selection.
You may also want to tweak the following settings:
Do not play notification
when I am busy
You will see the pop up dialog when you have set your status to Busy, but no ring
tone will be played. This setting is enabled by default.
Do not play notification
when I am in a call
You will see the pop up dialog when you are already in a call, but no ring tone
will be played. This setting is disabled by default.
Enable tray icon
notifications
Movi provides "balloon"-style notifications from the systray, for example if you
have missed calls. This setting is enabled by default.