- DL manuals
- TANDBERG
- Receiver
- TT1260
- Instruction Manual
TANDBERG TT1260 Instruction Manual
Summary of TT1260
Page 1
St.Tm.E10100.1 issue 1 english (uk) instruction manual tt1260 standard definition professional receiver/decoder software version 2.1 (and later) tt1260/dirbas and options typical tt1260 satellite receiver or decoder.
Page 2
Preliminary pages page ii instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 issue 1 first published in 2002 by: t andberg t elevision l td r egistered a ddress : u nit 2 s trategic p ark , c omines w ay , h edge e nd , s outhampton , h ampshire , so30 4da u ...
Page 3: List of Contents
Preliminary pages instruction manual: tt1260 standard definition professional receiver/decoder page iii st.Tm.E10100.1 list of contents chapter 1: introduction this chapter identifies the equipment versions covered by this manual; describes the purpose of the equipment in a typical system; provides ...
Page 4: Index
Preliminary pages page iv instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 index forms service/repair order form.
Page 5: About This Manual
Preliminary pages instruction manual: tt1260 standard definition professional receiver/decoder page v st.Tm.E10100.1 about this manual this manual provides instructions and information for the installation and operation of the tt1260 1u digital integrated receiver/decoder (ird). It should be kept in...
Page 6: Heed Warnings
Preliminary pages page vi instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 warnings, cautions and notes heed warnings all warnings on the product and in the operating instructions should be adhered to. The manufacturer can not be held responsible for injuri...
Page 7: Contact Information
Preliminary pages instruction manual: tt1260 standard definition professional receiver/decoder page vii st.Tm.E10100.1 contact information tandberg television customer services support services our primary objective is to provide first class customer care that is tailored to your specific business a...
Page 8: Technical Training
Preliminary pages page viii instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 technical training training courses tandberg television provides a wide range of training courses on the operation and maintenance of our products and on their supporting technolog...
Page 9: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page 1-1 st.Tm.E10100.1 chapter 1 1. Introduction contents 1.1 scope of this manual................................................. 1-3 1.1.1 who should use this manual ....................... 1-3 1.1.2 what this manual de...
Page 10
Introduction page 1-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 list of tables table 1.1: hardware marketing codes...........................................1-4 table 1.2: software key marketing codes.....................................1-4 table 1.3...
Page 11: 1.1
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-3 st.Tm.E10100.1 1.1 scope of this manual 1.1.1 who should use this manual this manual is written for operators/users of the tt1260 professional receivers and decoders. It describes the unit’s functions ...
Page 12
Introduction page 1-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 marketing codes table 1.1 gives a description of each hardware marketing code and table 1.2 gives a description of each software key marketing code. Table 1.1: hardware marketing codes o...
Page 13
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-5 st.Tm.E10100.1 table 1.3: main features of the decoder range marketing code inputs input data-rate coding digital outputs tt1260/hwo/asi 2 x asi 0.350-160 mbit/s 4 table 1.4: main features of the satel...
Page 14: 1.2
Introduction page 1-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 1.2 summary of features 1.2.1 main features the tt1260 is fully compliant with the appropriate sections of the mpeg-2 1 , dvb-s 2 and dsng 3 specifications and offers the following featu...
Page 15
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-7 st.Tm.E10100.1 · conditional access/scrambling: ² remote authorisation system (ras) version i ² ebu basic interoperable scrambling system (biss) mode-e ² ebu basic interoperable scrambling system (biss...
Page 16: 1.2.2
Introduction page 1-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 · control methods: ² front panel user interface ² asynchronous serial remote control ² over-air remote control (tandberg director system) (optional) 1.2.2 inputs asi inputs (decoders) tw...
Page 17: 1.2.4
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-9 st.Tm.E10100.1 there is a 25-way d-type connector on the optional alarm relay card (tt1260/hdc/alrm) with six relays for failure monitoring for ncp over-air. The operator can define (using the alarm me...
Page 18: 1.3
Introduction page 1-10 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 1.3 the satellite receiver 1.3.1 typical satellite system the tt1260 satellite receiver is a component of the mpeg-2/dvb compliant range of tandberg television equipment. It is designed...
Page 19: 1.3.2
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-11 st.Tm.E10100.1 1.3.2 input connections the satellite receiver interfaces directly to low-noise block (lnb) and accepts an intermediate frequency (if) input in the band 950 - 2150 mhz (l-band) for oper...
Page 20: 1.3.4
Introduction page 1-12 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 1.3.4 over-air software download (tandberg director systems) the tt1260 satellite receiver is shipped with the appropriate software installed, but it is designed to allow replacement of...
Page 21: 1.4
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-13 st.Tm.E10100.1 1.4 the decoder 1.4.1 typical decoder system the decoder is a component of tandberg television’s range of equipment. It is designed for use by broadcasters and distributors of video and...
Page 22: 1.4.2
Introduction page 1-14 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 1.4.2 input connections the decoder has the following inputs: two asi copper interfaces for operation up to 160 mbit/s for 188 byte packets and 160 mbit/s for 204 byte packets. 1.4.3 wh...
Page 23: 1.5.2
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-15 st.Tm.E10100.1 1.5.2 front panel (local) modes operating the ird from the front panel is via two main operating modes: navigate and edit. See section 3.3, front panel operating modes. Figure 1.8: fron...
Page 24: 1.6
Introduction page 1-16 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 1.6 guided tour 1.6.1 construction the tt1260 is constructed using a screened self-ventilated modular system; all operational inputs and outputs are via rear-panel connectors. The unit ...
Page 25: 1.6.5
Introduction instruction manual: tt1260 standard definition professional receiver/decoder page 1-17 st.Tm.E10100.1 1.6.5 conditional access and scrambling options videoguard director there is a slot on the rear panel to allow the insertion of a conditional access (ca) card for the videoguard directo...
Page 26
Introduction page 1-18 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 27: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page 2-1 st.Tm.E10100.1 chapter 2 2. Installing the equipment contents 2.1 read this first!......................................................... 2-3 2.1.1 handling...........................................................
Page 28
Installing the equipment page 2-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 list of figures figure 2.1: air flow through the equipment...................................2-4 figure 2.2: ac power inlet assembly.............................................
Page 29: 2.1
Installing the equipment instruction manual: tt1260 standard definition professional receiver/decoder page 2-3 st.Tm.E10100.1 2.1 read this first! 2.1.1 handling the tt1260 must be handled and installed carefully and thoughtfully to prevent safety hazards and damage. 2.1.2 installing the equipment e...
Page 30: 2.3
Installing the equipment page 2-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 2.3 installing the equipment 2.3.1 fixing the tt1260 is designed for fixed use only and has been shipped with fixing brackets suitable for a standard 19 inch rack. When insta...
Page 31: 2.3.3
Installing the equipment instruction manual: tt1260 standard definition professional receiver/decoder page 2-5 st.Tm.E10100.1 protection from moisture do not install this equipment in areas of high humidity or where there is a danger of water ingress. 2.3.3 installing cables - safety power supply ca...
Page 32: 2.5.2
Installing the equipment page 2-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 warnings… 1. The tt1260 should only be operated from the type of power source indicated on the marking label. If you are not sure of the type to your business, consult your a...
Page 33: 2.5.3
Installing the equipment instruction manual: tt1260 standard definition professional receiver/decoder page 2-7 st.Tm.E10100.1 table 2.2: supply cord wiring colours uk (bs 1363) europe (cee 7/7) usa (nema 5-15p) earth: green-and-yellow green-and-yellow green neutral: blue blue white live: brown brown...
Page 34: 2.7
Installing the equipment page 2-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 figure 2.3: location of the technical earth 2.7 signal connections 2.7.1 general caution... It is strongly recommended that the terminal marked at the rear panel of the equip...
Page 35
Installing the equipment instruction manual: tt1260 standard definition professional receiver/decoder page 2-9 st.Tm.E10100.1 figure 2.5: tt1260 signal connections frame sync hi-z rs232/rs485 remote frame synchronisation rs-232/rs-485 remote control asi transport streams asi transport streams analog...
Page 36: 2.7.2
Installing the equipment page 2-10 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 2.7.2 tt1260 base unit (tt1260/dirbas) rear panel view figure 2.6: typical decoder rear panel, with asi input and alarm option fitted asi out two bnc sockets output asi tran...
Page 37
Installing the equipment instruction manual: tt1260 standard definition professional receiver/decoder page 2-11 st.Tm.E10100.1 table 2.5: audio decoding pin-outs item specification connector type 9-way, female, d-type connector designations audio 1 audio 2 pin-outs pin 1 ¾ digital audio + pin 2 ¾ gr...
Page 38
Installing the equipment page 2-12 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 frame synchronisation a bnc socket is used by the decoder to frame lock to an external video source. The frame information is input as a composite synchronise signal, with o...
Page 39
Installing the equipment instruction manual: tt1260 standard definition professional receiver/decoder page 2-13 st.Tm.E10100.1 remote control connect to a pc and use the system menu #6.1.2 to switch between the rs-232 and rs-485 input standards. The specification for this connector is given in secti...
Page 40: 2.7.3
Installing the equipment page 2-14 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 rs-232 low-speed asynchronous data output a 9-way, d-type female connector provides an asynchronous serial communications interface for the reception of low-speed data. The ...
Page 41
Installing the equipment instruction manual: tt1260 standard definition professional receiver/decoder page 2-15 st.Tm.E10100.1 connector details alarm option the specification for this connector is given in annex b, section b.5.5, alarm connectors. 25 1 alarm option table 2.13: relay alarm output sp...
Page 42: 2.8
Installing the equipment page 2-16 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 2.8 option card connectors option cards are described in chapter 5, options..
Page 43: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page 3-1 st.Tm.E10100.1 chapter 3 3. Operating the equipment locally contents 3.1 powering the equipment........................................... 3-3 3.1.1 switching on................................................. 3-3...
Page 44
Operating the equipment locally page 3-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 list of tables table 3.1: navigate mode ..............................................................3-5 table 3.2: edit mode ...........................................
Page 45: 3.1
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-3 st.Tm.E10100.1 3.1 powering the equipment 3.1.1 switching on caution... This equipment should not be operated unless the cooling fan is working and there is free-air flow around the ...
Page 46: 3.1.2
Operating the equipment locally page 3-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 3.1.2 power-up operating modes no tt1260 initialising is displayed during power-up. The alarm led and lock led illuminate briefly yes secondary flash code is loaded is...
Page 47: 3.2
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-5 st.Tm.E10100.1 3.2 front panel controls and pushbuttons front panel items are described under section 1.6, guided tour. When the front panel pushbuttons are not used for approximatel...
Page 48: 3.3.3
Operating the equipment locally page 3-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 3.3.3 edit mode edit mode edits the right display area and allows the user to alter control parameters that define the tt1260 behaviour. To enter edit mode press the e...
Page 49: 3.4
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-7 st.Tm.E10100.1 3.4 using the local controls 3.4.1 lcd menu descriptions detailed lcd menu descriptions are given in annex c, menus. This chapter concentrates on describing the use of...
Page 50: 3.5
Operating the equipment locally page 3-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 3.5 setting up the input (menu #2) 3.5.1 satellite receiver use table 3.5 to step through the set up procedure of the satellite receiver using menu #2. The transmissio...
Page 51: 3.6
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-9 st.Tm.E10100.1 3.6 service configuration (menu #3) 3.6.1 selecting a service setting up a service each transport stream may contain many services. Menu #3 allows a service to be chos...
Page 52: 3.6.3
Operating the equipment locally page 3-10 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 5 scroll down to menu #3.1.7 and edit the parameter for framesync enable (enabled or disabled). Press save. Edits the parameter for framesync enable. 6 scroll down to...
Page 53: 3.6.4
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-11 st.Tm.E10100.1 selecting the audio manually it is possible to manually select any audio component from the active service by using the front panel controls or via the remote control...
Page 54: 3.6.5
Operating the equipment locally page 3-12 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 3.6.5 setting up teletext the teletext data is transmitted in teletext pes packets. It uses its own pid to extract the teletext pes packets from the transport stream....
Page 55: 3.6.7
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-13 st.Tm.E10100.1 3.6.7 viewing the pcr pid menu table 3.14: viewing the pcr pid menu step action result 1 go to menu #3.7. Xxxx is the pcr pid yyyyyyyyyy is (present or not present) g...
Page 56
Operating the equipment locally page 3-14 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 · periodic control word changes during transmission. Videoguard, ras and biss the process for setting this up is as for the ras ca. Changing the videoguard customer i...
Page 57
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-15 st.Tm.E10100.1 3.6.10 setting up the transport stream output (tso) set-up procedure use table 3.5 to step through the set up procedure of the satellite receiver using menu #2. Use t...
Page 58: 3.7
Operating the equipment locally page 3-16 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 3.7 setting up the alarms (menu #5) menu #5 allows a selection of alarms to be edited. Table 3.18: setting up the alarms step action result 1 go to menu #5. Accesses ...
Page 59: 3.9
Operating the equipment locally instruction manual: tt1260 standard definition professional receiver/decoder page 3-17 st.Tm.E10100.1 step action result 5 scroll down to menu #6.1.4 and edit the subnet mask. Press save. Edits the subnet mask. 6 scroll down to menu #6.1.5 and activate/deactivate the ...
Page 60
Operating the equipment locally page 3-18 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 3.10.2 setting up a preset service follow the steps in table 3.22 to store the current service as a preset. Table 3.22: setting up a preset service step action result...
Page 61: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page 4-1 st.Tm.E10100.1 chapter 4 4. Alarms contents 4.1 introduction ............................................................... 4-3 4.2 location of the alarm and indication leds ............... 4-3 4.3 alarm led.........
Page 62
Alarms page 4-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 63: 4.1
Alarms instruction manual: tt1260 standard definition professional receiver/decoder page 4-3 st.Tm.E10100.1 4.1 introduction there are two front panel leds that indicate the status of the tt1260. These are used to indicate abnormal performance of the unit. 4.2 location of the alarm and indication le...
Page 64: 4.4
Alarms page 4-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 4.4 relays in addition to the one summary alarm, there is an alarm relay card (tt1260/hdc/alrm) with additional six relays. The alarm relays are programmable to reflect the state of one or mor...
Page 65: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page 5-1 st.Tm.E10100.1 chapter 5 5. Options contents 5.1 option card locations .............................................. 5-3 5.2 asi input card (tt1260/hwo/asi) .......................... 5-3 5.2.1 general...............
Page 66
Options page 5-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 67: 5.1
Options instruction manual: tt1260 standard definition professional receiver/decoder page 5-3 st.Tm.E10100.1 5.1 option card locations the functionality can be enhanced with the inclusion of option cards. Each card consists of a horizontally mounted pcb with rear panel connector(s). The cards are fi...
Page 68: 5.2.3
Options page 5-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 5.2.3 connector details provides a dvb-compliant copper connection. The input supports both byte-mode and single packet burst mode and is activated through the input menu (#2). The specificat...
Page 69: 5.3.3
Options instruction manual: tt1260 standard definition professional receiver/decoder page 5-5 st.Tm.E10100.1 5.3.3 connector details l-band inputs connect the l-band output of a suitable lnb to the f-type connector either directly or via a suitable attenuator giving adequate consideration to lightni...
Page 70: 5.4
Options page 5-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 audio outputs a pair of 9-way female d-type connectors provide two stereo channels. Each connector carries a single channel of a stereo pair in both analogue and digital form. The output can ...
Page 71: 5.4.3
Options instruction manual: tt1260 standard definition professional receiver/decoder page 5-7 st.Tm.E10100.1 5.4.3 connector details the active input is chosen using the input status menu (#2). The specification for this connector is given in annex b, section b.4.2, 8psk/16qam satellite receivers. T...
Page 72: 5.5.2
Options page 5-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 5.5.2 rear panel view figure 5.5: high speed rs-422 data enabler card rear panel 5.5.3 connector details high-speed data (synchronous data) is carried in a transport stream as private data. T...
Page 73: 5.6
Options instruction manual: tt1260 standard definition professional receiver/decoder page 5-9 st.Tm.E10100.1 5.6 qpsk/8psk/16qam (tt1260/swo/16qam) this option provides a software key license for tt1260/hwo/hm, enabling qpsk, 8psk, and 16qam. The key is downloaded via the ethernet or entered via the...
Page 74: 5.10
Options page 5-10 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 5.10 videoguard director ca/tandberg director ncp (tt1260/swo/dir) this option provides a software key to enable videoguard director ca/tandberg director ncp. The key is downloaded via the e...
Page 75: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page 6-1 st.Tm.E10100.1 chapter 6 6. Preventive maintenance and fault-finding contents 6.1 routine checks......................................................... 6-3 6.1.1 cooling fan .........................................
Page 76
Preventive maintenance and fault-finding page 6-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 77: 6.1
Preventive maintenance and fault-finding instruction manual: tt1260 standard definition professional receiver/decoder page 6-3 st.Tm.E10100.1 6.1 routine checks 6.1.1 cooling fan there are no routine checks associated with this equipment other than to ensure that the unit is adequately cooled. This ...
Page 78: 6.2.2
Preventive maintenance and fault-finding page 6-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 4. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions...
Page 79: 6.4
Preventive maintenance and fault-finding instruction manual: tt1260 standard definition professional receiver/decoder page 6-5 st.Tm.E10100.1 6.4 fault-finding 6.4.1 general the information contained in this chapter is intended to isolate the unit as the faulty equipment if a system failure occurs. ...
Page 80
Preventive maintenance and fault-finding page 6-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 table 6.1: fuse information item specification fuse single pole, fitted in live conductor in power input filter at rear of unit. Fuse type 5 mm x 20 mm anti-s...
Page 81: 6.6
Preventive maintenance and fault-finding instruction manual: tt1260 standard definition professional receiver/decoder page 6-7 st.Tm.E10100.1 6.6 disposal 6.6.1 moulded plugs if the moulded plug fitted to the mains cable supplied with this equipment is not required, use another cable. If the supplie...
Page 82
Preventive maintenance and fault-finding page 6-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 83
Instruction manual: tt1260 standard definition professional receiver/decoder page a-1 st.Tm.E10100.1 annex a a. Glossary the following list covers most of the abbreviations, acronyms and terms used in tandberg television limited manuals. All terms may not be included in this manual. Mm micrometre (f...
Page 84
Glossary page a-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 b3zs bipolar with three zero substitution: a method of eliminating long zero strings in a transmission. It is used to ensure a sufficient number of transitions to maintain system synchronisa...
Page 85
Glossary instruction manual: tt1260 standard definition professional receiver/decoder page a-3 st.Tm.E10100.1 cofdm coded ofdm: cofdm adds forward error correction to the ofdm transmission consisting of reed-solomon (rs) coding followed by convolutional coding to add extra bits to the transmitted si...
Page 86
Glossary page a-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 dvb si digital video broadcasting service information. Dvb-pi dvb-professional interfaces: ttv lan search shows – dvb physical interfaces earth technical earth: ensures that all equipment ch...
Page 87
Glossary instruction manual: tt1260 standard definition professional receiver/decoder page a-5 st.Tm.E10100.1 icam integrated conditional access module: embedded in the ird and responsible for descrambling, plus packet filtering and reception. It also contains the physical interface to the subscribe...
Page 88
Glossary page a-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 lo local oscillator. Lsb least significant bit. Luminance the television signal representing brightness, or the amount of light at any point in a picture. The y in yc r c b. Lvds low voltage...
Page 89
Glossary instruction manual: tt1260 standard definition professional receiver/decoder page a-7 st.Tm.E10100.1 nm nanometre: a unit of length equal to one thousand millionth (10 -9 ) of a metre. Ntsc national television systems committee: the group, which developed analogue standards used in televisi...
Page 90
Glossary page a-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 ppv pay per view: a system of payment for viewing services based on a usage / event basis rather than on on-going subscription. Subscribers must purchase viewing rights for each ppv event th...
Page 91
Glossary instruction manual: tt1260 standard definition professional receiver/decoder page a-9 st.Tm.E10100.1 sfn single frequency network: the sfn technique allows largegeographic areas to be served with a common transmission multiplex. All transmitters in the network are synchronously modulated wi...
Page 92
Glossary page a-10 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 tsdt transport stream descriptor table: a component of the mpeg-2 psi data. This table describes which type of transport stream it is in (i.E. Dvb, atsc etc.). It may also contain other des...
Page 93: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page b-1 st.Tm.E10100.1 annex b b. Technical specification contents b.1 output b-3 b.1.1 international television standards ...............B-3 b.1.2 video.............................................................B-4 supp...
Page 94
Technical specification page b-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 table b.7: supported audio data bit-rates (mpeg-2) .................. B-8 table b.8: analogue audio performance ...................................... B-9 table b.9: maximum u...
Page 95: B.1
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-3 st.Tm.E10100.1 b.1 output b.1.1 international television standards two composite video outputs are provided at the rear panel. These carry identical video. The standard is selectable to pal-...
Page 96: B.1.2
Technical specification page b-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 b.1.2 video supported video resolutions the tt1260 supports mp@ml and 4:2:2p@ml with video resolutions described in table b.3. Table b.3: supported video resolutions 625-line,...
Page 97: B.2
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-5 st.Tm.E10100.1 vertical blanking signals the tt1260 range of receivers and decoders support the following vbi reinsertion and signalling: · vbi streams · vps data and pass through · wss data...
Page 98: B.2.2
Technical specification page b-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 b.2.2 mpeg audio the tt1260 supports decoding of mpeg audio as follows: · compression layers: mpeg-1 layers i and ii · sampling rates (khz): 32, 44.1, 48 · maximum compressed ...
Page 99: B.3.2
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-7 st.Tm.E10100.1 b.3.2 analogue audio the tt1260 supports level control of the audio outputs. Independent control of each output of each stereo pair is provided via the user interface and remo...
Page 100: B.3.6
Technical specification page b-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 · right to both (right signal to left and right outputs) b.3.6 dual mono where a dual mono service is available (i.E. Stream 1 and stream 2 sharing the same pid), it is possib...
Page 101: B.4
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-9 st.Tm.E10100.1 b.3.10 analogue audio performance table b.8: analogue audio performance parameter performance voltage gain adjustment ± 1 dbm maximum undistorted output (terminated with 600 w...
Page 102: B.5
Technical specification page b-10 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 b.5 input specifications b.5.1 qpsk satellite receivers general table b.10: qpsk satellite receiver input specification parameter specification l-band input safety status sel...
Page 103
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-11 st.Tm.E10100.1 table b.11: qpsk l-band satellite input — eb/n 0 ratio convolutional fec rate receive eb/n 0 ratio (db min) in if loop for correct mpeg-2 system ½ 4.5 2 / 3 5.0 ¾ 5.5 5 / 6 6...
Page 104: B.5.2
Technical specification page b-12 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 b.5.2 8psk/16qam satellite receivers table b.13: qpsk/8psk/16qam satellite receiver input specification parameter specification l-band input safety status selv number of inpu...
Page 105
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-13 st.Tm.E10100.1 table b.14 shows the eb/no requirements to ensure error free demodulation for all supported fec rates. Table b.14 shows the minimum and maximum possible bit-rates for all fec...
Page 106: B.5.3
Technical specification page b-14 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 16qam/8psk lnb control the ird supports voltage controlled lnbs only. The available voltages and current are shown in table b.16. Typical lnb requirements are shown in table ...
Page 107: B.5.4
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-15 st.Tm.E10100.1 b.5.4 frame sync connector the decoder can frame lock to an external video source. The frame information is input as a composite synchronous signal, with or without active vi...
Page 108: B.6.2
Technical specification page b-16 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 digital video these connectors are located on the motherboard of the tt1260 base unit (tt1260/dirbas). Table b.21: digital video output connectors item specification safety s...
Page 109: B.6.3
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-17 st.Tm.E10100.1 b.6.3 data outputs rs-232 asynchronous (low-speed) data this connector is located on the motherboard of the tt1260 base unit (tt1260/dirbas). Table b.23: rs-232 asynchronous ...
Page 110: B.6.5
Technical specification page b-18 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 b.6.5 alarm connectors table b.26: relay alarm output specification item specification connector designation: alarm connector type: 9-way d-type female for the summary alarm ...
Page 111: B.7
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-19 st.Tm.E10100.1 b.7 environmental b.7.1 conditions table b.28: environmental conditions operational temperature 0 °c to +45°c (+32°f to +113°f) ambient air temperature with free airflow humi...
Page 112
Technical specification page b-20 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 item specification rated frequency 60 hz ± 3 hz (100 – 120 vac) 50 hz ± 3 hz (200 – 250 vac) voltage selection auto-ranging rated current (max) 1.5 a input connector cee 22/i...
Page 113: B.9
Technical specification instruction manual: tt1260 standard definition professional receiver/decoder page b-21 st.Tm.E10100.1 b.9 compliance 14 b.9.1 safety this equipment has been designed and tested to meet the requirements of the following: en 60950 european safety of information technology equip...
Page 114: B.9.3
Technical specification page b-22 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 b.9.3 ce marking the ce mark is affixed to indicate compliance with the following directives: 89/336/eec of 3 may 1989 on the approximation of the laws of the member states r...
Page 115: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page c-1 st.Tm.E10100.1 annex c c. Menus contents c.1 lcd menus ...............................................................C-3 c.1.1 using the menus...........................................C-3 c.1.2 menu descriptions....
Page 116
Menus page c-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 table c.24: alarms menu............................................................C-16 table c.25: satellite ber alarm setup menu.............................C-16 table c.26: transport stream ...
Page 117: C.1
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-3 st.Tm.E10100.1 c.1 lcd menus c.1.1 using the menus detailed description of the use of menus is given in chapter 3, operating the equipment locally. C.1.2 menu descriptions this annex describes the front panel...
Page 118: C.3
Menus page c-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 c.3 the menu tree figure c.1: menu tree presets menu tt1260 initialising switch on boot screen 5.1 satellite ber alarm setup 5.2 transport stream alarm setup 5.3 video alarm setup 5.4 audio 1 a...
Page 119: C.4
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-5 st.Tm.E10100.1 c.4 presets menu items (#1) the presets menu contains up to 40 editable preset numbers in the range 01 – 40. Selecting a service via the presets menu automatically reconfigures the tt1260. Wher...
Page 120: C.5.2
Menus page c-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 c.5.2 qpsk satellite menu the qpsk satellite submenu accesses the qpsk parameters. Table c.5: qpsk satellite menu display title: qpsk satellite description quality pv ber -1 -3 -5 1.0 e-8 xxxxx...
Page 121: C.5.3
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-7 st.Tm.E10100.1 c.5.3 8psk/16qam menu the 8psk/16qam submenu accesses the 8psk/16qam parameters. Table c.6: 8psk/16qam menu display title: 8psk/16qam description quality eb/no xxx.X db xxx.X is a measure of th...
Page 122: C.6.1
Menus page c-8 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 display title: service description section teletext the teletext submenu contains information about the audio format and quality of the currently decoded audio stream on the primary output. C.6...
Page 123: C.6.2
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-9 st.Tm.E10100.1 display title: video description magenta step & flat (ntsc) flat field red (ntsc) luminance ramp (ntsc) bowtie (ntsc) 100% colour bars (ntsc) multi pattern (ntsc) black (ntsc) framesync xxxxxxx...
Page 124: C.6.3
Menus page c-10 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 c.6.3 audio 2 menu the audio 2 signal status submenu contains information about the audio format and quality of the currently decoded audio stream on the secondary audio output. Table c.10: au...
Page 125: C.6.5
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-11 st.Tm.E10100.1 table c.12: sync data menu (high speed rs-422 data enabler card fitted) display title: sync data description ww streams pid xxxx yyyyyyyyyyy ww is the number of high speed data streams present...
Page 126: C.6.7
Menus page c-12 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 display title: vbi description video index xxxxxxxxxxx yyyyyyy zzzz xxxxxxxxxxx indicates the presence of video index data (present, not present) yyyyyyy is the editable parameter for enabling...
Page 127: C.7
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-13 st.Tm.E10100.1 c.7 conditional access menu (#4) the conditional access submenu contains the current status of the smart card, and also lists the effect the smart card has for the currently selected component...
Page 128: C.7.3
Menus page c-14 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 c.7.3 director menu the director submenu displays all director status and version information and allows editing of the customer id and local lock pins. Table c.20: director menu display title...
Page 129: C.7.4
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-15 st.Tm.E10100.1 c.7.4 biss mode 1 menu the biss mode submenu allows editing of the control word keys for the biss user ids. Table c.21: biss mode 1 menu display title: biss description mode yyyyyyyyyy key xxx...
Page 130: C.8
Menus page c-16 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 c.8 alarms menu (#5) the alarms menu provides a summary of the alarm status. Table c.24: alarms menu display title: alarms description section satellite ber alarm setup satellite ber alarm and...
Page 131: C.8.2
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-17 st.Tm.E10100.1 c.8.2 transport stream alarm setup menu table c.26: transport stream alarm setup menu display title: alarms description if no transport stream yyyyyyyyyyyyyyy yyyyyyyyyyyyyy is editable: no al...
Page 132: C.8.4
Menus page c-18 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 c.8.4 audio 1 alarm setup menu table c.28: audio 1 alarm setup menu display title: description if audio 01 not running yyyyyyyyyyyyyy yyyyyyyyyyyyyy is editable: no alarm set alarm only set al...
Page 133: C.9
Menus instruction manual: tt1260 standard definition professional receiver/decoder page c-19 st.Tm.E10100.1 c.9 system menu (#6) table c.30: system menu display title: system description section setup the setup submenu allows the user to edit the operating mode, lcd contrast, serial remote protocol,...
Page 134: C.9.2
Menus page c-20 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 c.9.2 ird details menu the ird details submenu diplays the software, firmware, hardware, pld version and electronic serial number of the ird. Table c.32: ird details menu display title: ird de...
Page 135: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page d-1 st.Tm.E10100.1 annex d d. Using the tt1260 with the tandberg director system contents d.1 configuring the tt1260 for use with director..........D-3 d.1.1 getting started................................................
Page 136
Using the tt1260 with the tandberg director system page d-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 137: D.1
Using the tt1260 with the tandberg director system instruction manual: tt1260 standard definition professional receiver/decoder page d-3 st.Tm.E10100.1 d.1 configuring the tt1260 for use with director d.1.1 getting started you must have videoguard ca, a director smart card and be tuned to a director...
Page 138: D.2
Using the tt1260 with the tandberg director system page d-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 d.2 response to over-air commands d.2.1 general this section describes the receiver’s response to over-air commands. D.2.2 display on-screen display...
Page 139: D.2.6
Using the tt1260 with the tandberg director system instruction manual: tt1260 standard definition professional receiver/decoder page d-5 st.Tm.E10100.1 d.2.6 force service selection forces the receiver to decode a different service or stored channel (which may require a retune). The command is gener...
Page 140
Using the tt1260 with the tandberg director system page d-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 141
Instruction manual: tt1260 standard definition professional receiver/decoder page e-1 st.Tm.E10100.1 annex e e. Language abbreviations the tt1260 supports the following languages. These are shown in alphabetical order. No language abbreviation 5 arabic ara basa bas 14 bengali ben 135 chinese chi 19 ...
Page 142
Language abbreviations page e-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 the following non-iso languages are supported: language abbreviation main one aux two international sound int audio 1 aaa audio 2 aab audio 3 aac audio 4 aad audio 5 aae audio ...
Page 143
Page f-1 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 annex f f. Factory defaults units are shipped with the following factory default parameters. These can be restored at any time using the system menu. All other parameters are unaffected by restoring ...
Page 144
Factory defaults page f-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 menu page description default 3.2.3 routing stereo 3.2.4 clipping level 18db 3.2.5 ac3 downmix method surround stereo 3.4 async data (high speed rs-422 data enabler card not fitted) ...
Page 145: Contents
Instruction manual: tt1260 standard definition professional receiver/decoder page g-1 st.Tm.E10100.1 annex g g. Quick reference guide contents g.1 setting up the input ................................................. G-3 g.1.1 satellite receiver......................................... G-3 g.1.2 de...
Page 146
Quick reference guide page g-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 147: G.1 Setting Up The Input
Quick reference guide instruction manual: tt1260 standard definition professional receiver/decoder page g-3 st.Tm.E10100.1 g.1 setting up the input g.1.1 satellite receiver table g.1 steps through the setting up the satellite receiver using menu #2 input, and the qpsk 1 and 2 inputs. The transmissio...
Page 148: G.2
Quick reference guide page g-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 g.2 service configuration g.2.1 setting up a service each transport stream may contain many services. Menu #3 allows a service to be chosen as current and the parameters of its ...
Page 149: G.2.3
Quick reference guide instruction manual: tt1260 standard definition professional receiver/decoder page g-5 st.Tm.E10100.1 g.2.3 setting up a preset service follow the steps in table g.5 to store the current service as a preset. Table g.5: setting up a preset service step action 1 set up a service a...
Page 150
Quick reference guide page g-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 151
Instruction manual: tt1260 standard definition professional receiver/decoder index-1 st.Tm.E10100.1 index the following conventions are used in this manual: a page number entry in bold indicates a reference to a heading; a page number entry in italic is a reference to a table or figure; otherwise th...
Page 152
Index index-2 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 connector information, b-17, b-18 front panel, 1-16 methods, 1-8 modem baud rate, 1-15 modes, 1-14 serial remote control mode, 1-15 customer services address, viii d data outputs, 1-6 rs-232 con...
Page 153
Index instruction manual: tt1260 standard definition professional receiver/decoder index-3 st.Tm.E10100.1 l language non-iso languages, e-2 language, foreign manuals, ii l-band input frequency range, 1-11 l-band (#n) input specification, b-10, b-12 l-band input connector, 5-5 lcd display, 1-6 leds d...
Page 154
Index index-4 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 operation modes, 3-5 setting up preset service, 3-17 preset services preset menu (#1) pages, c-5 setting up, 3-17 programme delivery and control (pdc), 1-7 psu. See power supply q qpsk input car...
Page 155
Index instruction manual: tt1260 standard definition professional receiver/decoder index-5 st.Tm.E10100.1 qpsk input card, 5-5 remote control connector, b-17, b-18 rs-422 data input module, b-18 satellite qpsk input, b-10, b-12 video analogue composite output, b-15 video composite output, b-4 video ...
Page 156
Index index-6 instruction manual: tt1260 standard definition professional receiver/decoder st.Tm.E10100.1 blank.
Page 157: Proforma Invoice
Proforma invoice invoice no: date: your ref: our ref: sender : consignee: tandberg television asa philip pedersens vei 20 n-1366 lysaker norway shipped per: tnt (account 237067) delivery address: tandberg television repair c/o hadelandprodukter as terms of payment: n/c, return for service/repair moh...
Page 158: Tnt.
Side 1 av 1 tandberg television systems as , phillip pedersens vei 20, p.O.Box 322, n-1326 lysaker, norway tel: +47 67116200,fax: +47 67116201 repair/service order form (non norwegian customers) delivery is to be done by tnt. Tandberg television's tnt account is 237067. The unit(s) must be shipped u...