Csb.01 m2m cellular signal amplifier operator’s manual and installation guide www.Taoglas.Com designed & manufactured in the u.S.A..
Contents 1. Overview 3 2. Parts list 3 3. Installation guide 4 4. Installation with an sma device - fixed location 4 5. Installation with an sma device - mobile location 6 6. Led diagnostics 7 7. Diagnostic led definitions 7 8. Passive bypass technology – patent pending 8 9. Csb.01 specifications 9 ...
1. Overview the csb.01 wireless network range extender is a high performance, microprocessor controlled, bidirectional rf amplifier for the entire north american 850 mhz cellular and 1900 mhz pcs frequency bands. The amplifier has an automatic gain and oscillation control system that will automatica...
3. Installation guide disclaimer: installation of this device requires knowledge of basic electrical and experience with installing electronic devices. We recommend seeking a professional installer if you are not accustomed to installing electronics or high tech devices. Installation of this device ...
2. Connect the sma end of the sma to sma device cable to the cellular modem antenna connection. 3. Mount the outdoor signal antenna (#4 on parts list) vertically on any metal surface. A. Connect the outdoor signal antenna connector to the taoglas amplifier sma connector marked “antenna”. 4. Plug the...
5. Installation with an sma device - mobile location 1. If connecting to a cellular modem or mobile data terminal (e.G. Raven x, etc) in a vehicle or mobile application, connect the sma to sma device cable (#5 on parts list) to the taoglas amplifier connector marked “device”. 2. Connect the sma end ...
6. Led diagnostics once the amplifier is installed properly and power is applied, the leds will both turn on followed by the green led flashing. The green led will flash while the amplifier increases its gain to the optimum level. The red led may also flash during this stage while the gain (power) i...
8. Passive bypass technology – patent pending the csb.01 amplifier is equipped with passive bypass technology. This feature allows the amplifier to passively bypass itself and become merely a pass through cable when amplification is not necessary, during loss of power or when a fault is detected. Pa...
9. Csb.01 specifications • frequency range: cellular 850 (824mhz – 894mhz), pcs 1900 (1850mhz – 1990mhz) • 20db bw: 850 ul: 39mhz, 1900 ul: 115mhz • rated uplink maximum output power: cellular 850; 27dbm, pcs 1900; 27dbm • rated downlink maximum output power: cellular 850; -20dbm, pcs 1900; -20dbm •...
The term “ic:” before the radio certification number only signifies that industry of canada technical specifications were met. The manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to b...
12. Warranty information limited warranty taoglas ltd. Warrants that this product is free from defects in materials or workmanship for one year from the date of purchase. Within this period, taoglas ltd., will, at its sole option, repair or replace any components which fail in normal use. Such repai...
Taoglas, 8375 camino santa fe, suite a, san diego, ca 92121, usa.
