Taoglas CSB.01 Operators Manual And Installation Manual - 1. Overview
1. Overview
The CSB.01 Wireless Network Range Extender is a high performance,
microprocessor controlled, bidirectional RF amplifier for the entire North
American 850 MHz cellular and 1900 MHz PCS frequency bands. The amplifier
has an automatic gain and oscillation control system that will automatically
adjust the gain and the output power if a signal anomaly occurs. This amplifier
is designed to operate as a direct connect unit within a cellular system, for
maximum performance in weak signal coverage areas. The input power
requirements for the amplifier are positive 8.0 to 32.0 volts DC (negative
ground).
2. Parts List
Depending upon the connector type of the cellular device, Taoglas can
customize the M2M kit to include the appropriate adapters to ensure a
seamless and quick installation. Adapter types include, but are not limited to
SMA, RP-SMA, MMCX, MCX, FME, and TNC.
1: CSB.01 Amplifier Unit
6. Optional –SMA-to-MMCX
Device Cable –
If connecting
to an MMCX device.
3: Hardwire DC
Power Cable
2: AC/DC Power Adapter
5: SMA-to-SMA Device
Cable –
If connecting to an
SMA device
4: Magnetic-Mount
Outdoor Signal Antenna
MB.TG30.A.305111