Tapco Link.MIDI Owner's Manual - Getting Started
5
GETTING STARTED
Use this section to get your Link.MIDI 4x4 set up quickly.
Connecting the Link.MIDI 4x4
• To stand the Link.MIDI 4x4 upright, pull the
stabilizer bar downward and twist it out 90º from
the body, as shown here.
• Connect your MIDI keyboard(s) and other MIDI
equipped instruments or sound modules to the
MIDI IN ports on the Link.MIDI 4x4.
• Connect the USB port on the Link.MIDI 4x4 to the
USB port on your computer using the USB cable
included in the box.
• Configure the Link.MIDI 4x4 in your application
software.
Many MIDI Interface applications require connecting
just one keyboard or MIDI controller to INPUT 1 and
using multiple MIDI outputs. This is why INPUT 1 is
located on the back of the Link.MIDI 4x4 along with
OUTPUTS 1-3. This keeps all the cables in the back and
out of the way.
IN
OU
T
1
2
3
4
POWER
USB
THRU
USB MIDI INTERF
ACE
LINK.midi 4x4
ACTIVITY
THRU
OUTPUT
INPUT
2
3
4
4
LOOK
CLOSER
USB
OUTPUT
INPUT
1
1
2
3