Tascam HD-R1 Owner's Manual - Front Panel
TASCAM HD-R1
9
3–Controls, Indicators and Connectors
Front Panel
Some of the following keys have additional functions
when used in combinations, or with the shift button,
indicated by labeling on the front panel. These
functions are described later on in this manual.
e
SKIP
µ
Skips to the previous track. If pressed while
located at the first track, locates to the last track.
While stopped, hold down to rewind. While
playing, hold down for more than 1.5 seconds to
skip-play backward.
If you press this key at a point more than one
second after the beginning of the track, you will
locate to the beginning of the current track.
If you press this key at a point less than one second
after the beginning of the track, you will locate to
the beginning of the previous track. (This works
like a CD player.)
r
SKIP
≤
Skips to the next track. If pressed while located
at the last track, locates to the first track. While
stopped, hold down to fast-forward. While playing,
hold down for more than 1.5 seconds to skip-play
forward.
t
MARK
Creates a new marker at the current time. The
marker is given a name beginning with “
MARK
”.
i
STOP
·
Stops any transport motion, silences input
monitoring. If pressed while playing, locates
to the beginning of the playlist. If pressed
while recording, locates to the beginning of the
newly recorded track unless
Main Menu ˘
System Settings ˘ Resume
is set to
On
.
o
PLAY
¥
Plays from the current transport location. If
pressed while in the ready-to-record state, starts
recording. The
PLAY
indicator lights when
playing or recording.
p
READY
π
While stopped, press to enter the ready-to-play
transport state. While playing, press to pause
the transport and press
PLAY
to continue. While
recording, press to pause the transport while
continuing to monitor the input and press
PLAY
to
continue recording. Nothing happens if
READY
is
pressed while the transport is already in the ready-
to-record or ready-to-play state. The
READY
indicator lights when ready-to-play or ready-to-
record.
a
RECORD
–
While stopped, press to enter the ready-to-
record state, which turns on input monitoring in
preparation for entering record. While in ready-
to-record, press
PLAY
to start recording. The
RECORD
indicator lights when ready-to-record
or recording. Pressing this key while already
recording will cause the HD-R1 to create a new
track.
The transport keys continue to work while you are
viewing the menu screens. Pressing
RECORD
while
viewing a menu will enter record and automatically
switch the screen back to operation mode.