Tascam HS-4000 New Features Manual - Hs-4000

X

HS-4000

TASCAM HS-4000

 9

If you cancel rebuilding, inconsistencies between the system files and audio 

files will occur and the following message will appear. 

When rebuilding becomes necessary, V icons will appear on the  

following buttons. 

i The file name button on the Home Screen 

i The 

PROJECT

 screen 

MENU

 button 

i The 

REBUILD

 buttons in various menus

Touch a 

REBUILD

 button in one of the menus to rebuild.

Remote control by Telnet

Remote control of this unit is possible over Ethernet via port 23 using Telnet. 

0 Necessary setting for connections by Telnet

The following settings are necessary for connecting to this unit by Telnet. 

IP address:   This unit’s IP address is shown in the 

IP Address

 field of 

the 

REMOTE SETUP

 screen 

ETHERNET

page. 

Port:    

   23

Password:  

HS-4000 (default, case sensitive)

This setting can be changedby using the 

Password

Change

 button on the 

REMOTE SETUP

 screen 

ETHERNET

page. 

0 Connecting to the unit by Telnet

1.  After connecting with this unit by Telnet using the above IP ad-

dress and port number, press the computer Enter key. 

2.  When “Enter Password” appears on the Telnet console, input the 

above password and press the Enter key. 

3.  When login succeeds, “Login Successful” appears on the Telnet 

console. Input “exit”and press the Enter key to end the Telnet  

connection. 

NOTE

i 2 simultaneous Telnet connections are possible. 

i Telnet connections cannot be made when EXTERNAL Control has been set to 

LOCK on the Lock Setup screen. Likewise, setting this to LOCK will end any active 

Telnet connections.

i Changing any settings on the REMOTE SETUP screen of the ETHERNET page will 

also end any active Telnet connection. 

i For information about this unit's RS-232C command protocol, please contact 

TASCAM customer support.

VNC (virtual network computing) 

By using a VNC viewer application, you can view and operate the contents of 

this unit's LCD screen on a computer. 

In the VNC viewer application, you can use a mouse to conduct the following 

operations. 

Mouse left click: 

Same as touching the unit's LCD. 

Mouse wheel click: 

Same as pressing the unit's ENTER key. 

Mouse wheel operation:

Same as using the unit's DATA dial. 

Mouse wheel push and 

turn: 

Same as using the unit's DATA dial while 

pushing it to make large setting changes 

(COARSE mode operation). 

In addition, when the VNC viewer application is active, you can conduct the 

following operations by using the computer keyboard. 

F1 to F12 keys: 

These work the same as an external key-

board connected to the unit. For details 

see the “List of keyboard operations” in 

“Operation using a computer keyboard” 

in “12 – Other functions” of this unit's 

manual. 

Home key:

This works the same as this unit's HOME 

key and opens the Home Screen. 

Press the End key while pressing and 

holding the Home key to open the 

LOCK SETUP

 screen. 

End key: 

This works the same as this unit's MENU 

key and opens the 

MENU

 screen. 

Press the End key while pressing and 

holding the Home key to open the 

LOCK SETUP

 screen. 

Page Down: 

This works the same as this unit's PROJ-

ECT key and opens the 

PROJECT

 screen. 

Cursor 

↑ key: 

This works the same as turning this unit's 

DATA dial right. 

Cursor 

↓ key:

This works the same as turning this unit's 

DATA dial left. 

Character input keys: 

Use to input characters when a keyboard 

screen appears on the unit.