Tascam US-322 Quick Start Manual - Mixer Panel
TASCAM US-322/366
7
Using the mixer functions on the
mixer panel
Press the MIXER PANEL button on the top panel of the unit
to open the mixer panel on the computer display, and select
the “MIXER” tab to show the “MIXER” screen.
1
Pan sliders
Drag the sliders left and right to change the stereo
position of each channel.
They appear blue when centered (“C”) and appear orange
otherwise.
2
Faders
Drag up and down on the faders to adjust the balance of
the various inputs. Use the MASTER L/R fader to adjust
the overall output level of the mixer.
For details about the other settings, please refer to the
Owner’s Manual.
Making computer settings
Windows and Windows Media Player
1. Quit all applications and open the “Control Panel” from
the “Start” menu.
2. Open “Sound”.
NOTE
If you do not see this item, click “Hardware and Sound”.
3. Click the “Playback” tab, click “Speakers TASCAM US-322
(US-366)” and click “Set Default”. The green check mark
will move to the “Speakers TASCAM US-322 (US-366)”
item.
Make the following settings if you are using the unit for
live broadcast on the Internet or otherwise as a recording
device.
Click the “Recording” tab, click “Line In TASCAM US-322
(US-366)” and click “Set Default”. The green check mark
will move to the “Line In TASCAM US-322 (US-366)” item.
4. Click “OK.”
5. Start Windows Media Player, select an audio file and
begin playback.
NOTE
•
If you change the setting while Windows Media Player is
running, the software will not recognize that the device
has been changed. In this case, restart Windows Media
Player.
•
If you still cannot hear sound after making the settings
and completing the procedures above, restart the
computer.
•
If you make this setting, sound will be output through
this unit, but no sound will be output by the computer’s
speakers or headphone jack.
•
If you want to output Windows Media Player from this
unit’s
DIGITAL OUT
, on the “INTERFACE” tab of the mixer
panel, set “DIGITAL OUTPUTS” to “Computer 1-2”.
Mac OS X and iTunes
1. Open the Utilities folder, which is inside the Applications
folder, and double-click Audio MIDI Setup to launch it.
2. Control-click the US-322/366. Check use this device for
sound output. This moves speaker icon to US-322/366.
Make the following settings if you are using the unit for
live broadcast on the Internet or otherwise as a recording
device.
Control-click the “US-322(US-366)”. Check use this
device for sound input. This moves microphone icon to
“US-322(US-366)”.
3
.
Launch iTunes, select an audio file and start playback.
NOTE
If you want to output iTunes from this unit’s
DIGITAL OUT
without passing through its mixer, on the “INTERFACE”
tab of the mixer panel, set “DIGITAL OUTPUTS” to
“Computer 1-2”.