TATA Motors Indigo Owner's Manual & Service Book - page 126
124
MAINTENANCE & CAR CARE - Head Lamp
CAUTION
The electrical system is protected by fuses that are designed to
foil and prevent damage to wiring harness. Always replace blown
fuse with the same rating as specified to prevent wiring damage
that can result in a possible fire.
Head Lamps :
The head lamps are provided with two halogen lamps of H1 (High
beam) / H7 ( Low beam) type with single filament for providing
straight ahead illumination of the road for long distance or a dip
beam which illuminates the road immediately ahead for short
distance visibility. Use dip beam to avoid inconvenience / blinding
the drivers of oncoming vehicles.
The head lamps must be properly aligned in order to obtain maximum
road illumination and reduced glare for oncoming traffic. It is
recommended to check alignment of head lamp beams periodically
at authorised service outlets
Head lamp focus adjustment should be always carried out at the
authorised service outlets with the help of screen
Head Lamp Bulb Replacement :
•
Switch 'OFF' the head lamps & ensure that the bulb is not hot.
•
Open the bonnet and remove the lamp connector from the head
lamp bulb.
•
Remove rubber cap. Unlock the locking clip and take out the