TATA Motors Indigo Owner's Manual & Service Book - page 127
125
MAINTENANCE & CAR CARE - Head Lamp
bulb from the holder. This should be done carefully, otherwise it
may lead to breakage of the bulb holder / holding clip.
•
Note the instructions on the bulb carton.
Replace the bulb with a new one of the same type with right
orientation in the holder.
•
Lock the clip, fit the rubber cap and fix the connector.
•
Switch 'ON' the head lamps and check the lighting.
CAUTION
Do not clean or touch the head lamp reflector as it will damage
the mirror finish of the surface.
The horizontal and vertical adjustment screws are located on the
back of the reflector.
Precise adjustment can be carried out only in the authorised
workshops.
When replacing the head lamp bulb, handle it by gripping the cap.
Protect the glass from contact with your skin or hard object. If you
touch the glass, clean it with spirit & a clean cloth. After replacement
of the bulb in any emergency get the head lamp adjustment done at
an Authorised Service outlet at the earliest.
CAUTION
Halogen head lamp bulbs get very hot when illuminated. Oil,
perspiration or a scratch on the glass can cause the bulb to
break due to the heat.