TC Electronic INTONATOR User Manual - Setup
11
SETUP
Basic operation
- Press the SCALE/SETUP key to enter the Setup mode.
The left side of the display shows the Setup page number and
name. The right side of the display shows you the current
selected type or value corresponding to the selected Setup page.
- Press the ALPHA dial to select between the left side(type)/
right side(value) side of the display, and turn the ALPHA dial to
select types/values. The selected side will blink.
The Setup mode holds 11 different setup displays as described
below.
Input - Page 1
Select correct Input type. Choose between:
Analog L, Analog R, AES/EBU L, AES/EBU R,
S/PDIF L, S/PDIF R, Tos-link L, Tos-link R
or ADAT channels 1-8.
Analog
The INPUT knob is only active when analog Inputs are used.
AES - S/PDIF
When AES or S/PDIF is selected, Sync will automatically switch
to Ext. Clock. If no valid clock is present, the DIGITAL LOCK
LED will blink. When clock is accomplished the DIGITAL
LOCK LED will turn solid. Sync can be forced to follow one of
the available internal Clock Rates or the Sync In.
The "Digital Lock" LED now refers to the Sync In.
ADAT
When ADAT is selected, Sync will automatically switch to Ext
Clock. If no valid clock is present, the DIGITAL LOCK LED
will blink. When clock is accomplished the DIGITAL LOCK
LED will turn solid. Sync can be forced to follow one of the
available internal Clock Rates or the Wordclock Input.
The "Digital Lock" LED then refers to the Wordclock Input.
Note! ADAT Inputs are not available in Double Sample Rate
mode.
Sync - Page 2
The sync sources available are: Internal 44.1, 48, 88.2, 96kHz,
AES, S/PDIF, ADAT, Tos, Digi In and Sync In. If no valid clock
is present the DIGITAL LOCK LED will blink. Sync In format
must be Wordclock.
When External lock is accomplished the DIGITAL LOCK LED
will turn solid. When using internal Sample Rates, the DIGITAL
LOCK LED will not be lit.
Select between 44.1, 48, 88.2 and 96kHz
ADAT is not available at double Sample Rate.
Note! 88.2 and 96kHz is only available when Double Rate mode
is selected in Page 3 - see below.
Mode - Page 3
Select between running the Intonator at:
44.1/48kHz (normal) or
88.2/96kHz (double rate).
ADAT is only available when running the unit at 44.1 or 48kHz.
Output Ch - Page 4
Select between left or right.
Opt. Out - Page 5
Select optical Output format and channels.
Tos, ADAT 1/2, 3/4, 5/6 or 7/8, Thru.