TC-Helicon VoiceTone Create Product Manual - page 19

19

Patches

VoiceTone contains 99 effect patches. Each patch can

have any combination of settings and effects including

reverbs, delays, μMod, and Transducer. The patches are

organized into categories. Refer to the Patch List section

for descriptions of the categories and each effect Patch.

Selecting Patches:

1. Turn effects on by tapping the Right Footswitch so

that the Effect On Light turns red.

2. Select a patch by turning the Patch Knob to the

desired patch number as indicated on the Numeric

Display.

Tweaking Selected Patches:

1. Turn the knobs labeled Tweak X or Tweak Y to

change the patch's sound. When you turn the Tweak

Knobs, the Numeric Display shows the specific X or Y

value. After several seconds, the X or Y value display

times out, and the selected patch number is again

indicated on the Numeric Display.

Performances and Parts

Performances and parts allow you to sequence through

your favorite effect patches while keeping your hands

free to practice mic techniques, or wave to your adoring

audience. There are five performance locations. Each

location has an A and a B part. Each of these locations

can store a specific patch including any tweaks made

with the Tweak Knobs. When a performance is stored,

both the A and B part are stored simultaneously.

Selecting Performances and Parts

1. Press a Performance Button (1 - 5) to select that

performance.

2. Press the Left Footswitch to toggle between part A

and part B of the selected performance. The selected

part is indicated by the Part A/B Lights.

Patches, Performances, & Parts

The Patch List section details assigned tweak

parameters.

NOTE: