TC-Helicon VoiceTone Create Product Manual - Super Edit Mode & Reset

37

Super Edit Mode & Reset

Super Edit Mode

You might wonder how the developers and product

managers at TC-Helicon authored patches for

VoiceTone Create. Similar to methods used on other

products, a special mode was created for setting

advanced parameters. In and around the office, this

mode in VoiceTone Create was called Super Edit Mode.

Super Edit Mode allows access to dozens of parameters

per effect. These parameters are used to design any of

the 99 patches in Create. While using this mode during

final design we recognized it’s a powerful feature for an

advanced or curious user.

Visit the VoiceTone Create website and browse for the

Super Edit Mode link where a manual on this mode is

published.

http://www.tc-helicon.com/voicetonecreate

Restoring to Factory State

If at any time you want to get VoiceTone Create back to

its original presets and settings, follow this procedure.

1. Disconnect the power adapter from Create

2. Press and Hold Performance Buttons 1 & 2 while

plugging the power adapter into Create.

3. Create will clear all the performance information and

return it to factory settings. Once this is done (it only

takes a couple seconds), Create is ready to go.