TDK TVT1001BLK User Manual - page 13
24
25
First click on the Options button. This will bring up
the Audio Options window, which contains the
recording settings. Within the General tab, you can
select the desired Playback Device, Recording
Device, Bit Depth, Sample Rate and Driver Mode.
The recommended settings are Bit Depth: 16, Sample
Rate: 44100 and Driver Mode: MME (32 Bit). Then
click OK.
Or, if no changes are necessary, simply click OK
to accept the default settings. For more detailed
explanations, click on the Help button within the
Audio Options window.
The Recorder Module
To make a recording, use the turntable according to
the instructions beginning on page 15. Click on the
Recorder button; the Recorder window will appear.
This manual provides a brief summary of the recording
process using the Vinyl Recorder software. For more
detailed explanations, click on the Help button within
the Recorder window. To utilize all the effects and
features of this software, download the complete
user’s manual at http://www.cakewalk.com.
USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.)
The Recorder Transport buttons are shown below.
1. Input Monitor
5. Stop
2. Rewind (to beginning)
6. Play
3. Record
7. Jump to end
4. Pause
To Record an Audio File:
1. Click the Record button and the Pause function will
automatically engage.
2. If desired, click the Input Monitor button. This will
output the sound as it is recording.
3. Click the Pause button to start recording. Start
playback of the record; the meters on the right will
start showing activity and the waveform will begin.
USING TDK LIFE ON RECORD VINYL RECORDER – WINDOWS (CONT.)
Imation Confidential - Use Only By Permission
Controlled material extracted from Matrix on Aug 24, 2010 08:31:11 AM CDT