Teac HDR2250T User Manual - 7. Additional Information
13
6.5 Storage
You can view the data on all connected USB storage devices.
6.6 PVR Setting
7. Additional Information
7.1 Troubleshooting
Issue
Possible causes
What to do
LED on the front panel fail
to light up/is not lit.
Main supply cable is not connected.
Check if the mains supply cable is plugged in
the power socket.
No picture or sound.
Check the signal cable connections or change
the cable.
No startup menu on screen
after turning on STB for the
first time.
The system is connected by AV/
HDMI cables and the TV is not in
AV/EXT mode.
Switch the TV to the appropriate AV/HDMI
input.
The remote control is not
working.
Battery exhausted. Remote control
is not aimed correctly STB is in
standby mode.
Change the batteries. Aim the remote
control at the STB. Check that nothing blocks
the front panel. Chek if LED indicator on the
front panel is showing the time, press the
power button to switch off standby mode.
You have forgotten your
password.
Contact the dealer or Service Provider. They
will help you set it up again.
Auto Time Shift: Enable/disable time-shift function.
Time Shift Duration: Set the timeshift duration time.
Recording Storage: Select USB storage device to record to.
Playback Start Position: You can set the playback start
position for media and PVR .
Auto Play Next Program: You can enable or disable Auto
Play Next Program when current playing media ends.
No or weak cable signal.