Teac MP-300 User Manual - Previous/next Station
GB – 17 | MP-300
number, then press R/A-B button to confirm the storing and re-
turn to FM receiving.If you press MENU button, the unit will return
to current channel and won’t save the channel that has been
found out.
Note: By those operations above, the files can only be stored
temporarily. If you shut off the power directly, the file will be
lost. So if you want to keep it, you must press and hold
button, until the unit is powered off normally.
Previous/Next station
Under FM receiving status, press RW button to skip to the previ-
ous station, and press FF to skip to the next station.
Forced mono
When the FM stereophonic effect sounds not very good, press
button to achieve forced mono function, which could lower
the interference, press
button again, it return to stereo ef-
fect.
Volume adjustment
Under FM playing, press V+ or V- button to increase or decrease
the volume. The indicator on the LCD will change accordingly.
Quit FM Mode
Press and hold MENU button to quit FM mode.
Recording of FM Transmissions
If a transmission should be recorded from the internal FM radio
the R/A-B button has to be pressed (about 2 seconds) until
is
displayed. Recording starts immediately after releasing the key.
Pressing MENU stops recording.
Recording can be stopped and resumed at any time by press-
ing R/A-B (symbol
).
If FM recording Fxxx.WAV files are stored in the directory FM.