Teac MP-300 User Manual - Upgrading The Firmware
Other manuals for MP-300:
Basic Operation
Manual is about: MP3 Player
of
30
GB – 23 | MP-300
UPGRADING THE FIRMWARE
Normally it is not necessary to upgrade the firmware. It should
be carried out if the unit cannot be operated without prob-
lems.
Important:
Upgrading firmware may result in formatting of the memory.
Please backup any data stored on the player to your PC
before a firmware upgrade is performed.
Proceed as in the following:
1. Set the POWER button of the player to OFF.
2. Prior the player is connected to the PC the key
has to be
pressed and hold.
3. Connect the USB cable and set the POWER button of the
player to ON. In My Computer a mass storage device is shown.
Very important: Press and hold the key
during the whole
upgrade process.
4. Further proceeding: Start>Programs>SigmaTel MSCN Audio
Player>SigmaTel MSCN Firmware Download.