Teac SR-L200i Owner's Manual - page 6
www.flash-butrym.pl
Page 6
Control skill
1. Please set auto function to be off so that the light can works by controller when it
works according to DMX512. DMX512 can control 85 set lights, each connect will
signal core in series. Set address-mark for each light-then it can be controlled by
controller.
2. Make no1 tunnel and no6 tunnel in series when the light works under DMX512 and
set all of auto function to be off, other tunnel can not work when no6 tunnel works.
The no1 tunnel adjust speed, no6 tunnel control working time and color effective,
the speed of change color can be changed through no1 and no6.
3. The light will itself when it’s function setted to be mainframe, it does not need
controller, setting the light function as AUTO MAST, the speed is mixture color
as following 12-27 the color changment speed is from slow to fast from 2 second to
2 minute per time. 3 minute to 1,5 second per time mainframe is welcome by the