Triplett 9065 Instruction Manual - page 33
20. Recording Measurement Data
Press the function key labelled, “SAVE” to enter the menu
for saving, recording or viewing data. Press the cursor keys
to select the following options.
1) Save
While in the Save menu, press the “SAVE” function key to
store the measurement currently displayed. Up to 20,000
measurements can be saved on the meter.
2) View Save
In the Save menu with “View Save” highlighted, press the
“VIEW” function key to view stored save files. Press or
hold the function keys labelled, “PREV” or “NEXT” to scroll
through the saved data. Press the “DELETE” function key to
delete the selected saved data. Press the “RETURN” func-
tion key to return to the last menu. In addition to displaying
the saved data, the file save # and total number of saved
files are displayed in the lower left corner. The date and time
of the saved data are displayed in the lower right corner.
3) Delete All Save
In the Save menu with “Delete All Save” highlighted, press
the function key labelled, “DELETE” to delete all saved data
files. Press the function key labelled, “YES” to confirm. To
cancel the operation, press the function key labelled, “NO”.
4) Record
In the Save menu with “Record” highlighted, press the func-
tion key labelled, “ENTER” to enter the continuous
recording mode with a maximum of 10000 data points.
Press
(UP) or (DOWN) to edit the three following settings.
• Edit Name
In the Record Menu with “Edit Name” highlighted, press the
“EDIT” function key to edit the name of the recording. Press
(LEFT) or (RIGHT) to move the cursor and select where
to edit. Press the F1 key to switch the input to Uppercase
mode, then press
(UP) or (DOWN) to input uppercase
letters. Press the F2 key to switch the input to Lowercase
mode, then press
(UP) or (DOWN) to input lowercase let-
ters. Press the F3 key to switch the input to Digit mode, then
press
(UP) or (DOWN) to enter numbers or symbols. Press
the F4 key to save the Record name and exit edit mode.
• Set Interval
With “Set Interval” highlighted, press the “EDIT” function key
to set the time interval between recorded data points. Press
or hold
(LEFT) or (RIGHT) to move the cursors to select
where to edit. Press or hold
(UP) or (DOWN) to enter differ-
ent numbers. The interval time can be set from 1 sec to 60
min between data points.
• Set Duration
With “Set Duration” highlighted, press the “EDIT” func-
tion key to set the duration of the recording. Press or hold
(LEFT) or (RIGHT) to move the cursors to select where
to edit. Press or hold
(UP) or (DOWN) to enter different
numbers. The duration time can be set in days, hours and
minutes.
• Max Duration
Displays the maximum time for continuous recording with
the current settings. When ready to Record, press the
“START” function key to start a recording with the current
settings.
31