Summary of 1000 SERIES

  • Page 1

    User guide safety • installation & integration • operating instructions • maintenance • service 1000 series • clr1215 • 15" clear ice maker right product. Right place. Right temperature. Since 1962..

  • Page 2

    User guide u-line.Com safety • installation & integration • operating instructions • maintenance • service contents intro safety safety and warning disposal installation environmental requirements electrical cutout dimensions product dimensions side by side installation water hookup drain drain pump...

  • Page 3

    User guide introduction 1 u-line.Com welcome to u-line congratulations on your u-line purchase. Your product comes from a company with over five decades and three generations of premium modular ice making, refrigeration, and wine preservation experience. U-line continues to be the american leader, d...

  • Page 4

    User guide safety and warning 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service safety and warning notice please read all instructions before installing, operating, or servicing the appliance. Use this appliance for its intended purpose only and follow...

  • Page 5

    User guide product disposal and recycling 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service product disposal and recycling danger ! Risk of child entrapment. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves i...

  • Page 6

    User guide environmental requirements 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service environmental requirements this unit is designed to operate between 50°f (10°c) and 100°f (37°c). Higher ambient temperatures may reduce the unit’s ability to reach...

  • Page 7

    User guide electrical 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service electrical warning ! Shock hazard — electrical grounding required. Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected. Never rem...

  • Page 8

    User guide cutout dimensions 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cutout dimensions prepare site your u-line product has been designed for either free- standing or built-in installation. When built-in, your unit does not require additional...

  • Page 9

    User guide product dimensions 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service product dimensions 34-1/8" to 35-1/8" (867 mm to 892 mm) 14-15/16" (379 mm) 3-9/16" (91 mm) not including handle 23-1/4" (591 mm).

  • Page 10

    User guide side by side installation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service side by side installation two units may be installed side by side. Cut-out width for a side-by-side installation is the cut out dimension of a single unit times two....

  • Page 11

    User guide water hookup 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service water hookup prepare plumbing please use the braided stainless steel water supply line which comes attached. The water line is fitted with a standard 1/4" (6.35 mm) compression f...

  • Page 12

    User guide water hookup 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service.

  • Page 13

    User guide drain 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service drain models ending in (-00a, -01a) will not be equipped with factory installed drain pump. Models ending in (-40a, -41a) will have the factory installed drain pump. Drain connection ca...

  • Page 14

    User guide drain 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service factory installed drain pump if your drain line will run up to a stand pipe, disposal or spigot assembly, or does not otherwise meet the requirements for a gravity drain, you may have o...

  • Page 15

    User guide drain pump 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service drain pump notice please read this instruction completely before attempting to install or operate the unit. Improper hook-up can result in substantial property damage! If you are u...

  • Page 16

    User guide drain pump 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service installation procedure warning ! To prevent accidental electrocution, make certain that the floor surfaces surrounding the unit are dry whenever power/electricity is removed from, ...

  • Page 17

    User guide drain pump 3 u-line.Com safety • installation & integration • operating instructions • maintenance • service warning ! The back panel serves as a guard. Do not put your hands inside the ice machine cabinet or attempt to touch any components except the discharge tube during testing. Cautio...

  • Page 18

    User guide anti-tip bracket 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service anti-tip bracket 1. Slide unit out so screws on top of unit are easily accessible. 2. Remove the two screws from the opposite side of the hinge assembly using a slotted screw...

  • Page 19

    User guide general installation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service general installation leveling information 1. Use a level to confirm the unit is level. Level should be placed along top edge and side edge as shown. 2. If the unit is not...

  • Page 20

    User guide grille - plinth installation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service grille - plinth installation removing and installing grille warning ! Disconnect electric power to the unit before removing the grille. Warning ! Do not touch the...

  • Page 21

    User guide door swing 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door swing units have a zero clearance for the door to open 90°, when installed adjacent to cabinets. Stainless steel and black and white models require 2-1/8" (54 mm) door clearan...

  • Page 22

    User guide door stop 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door stop your u-line unit was shipped to you with the optional 90° pin(s). (models that are 15" wide include 1 pin. Models that are 24" wide include 2 pins.) the unit’s door will o...

  • Page 23

    User guide door adjustments 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service door adjustments door alignment and adjustment align and adjust the door if it is not level or is not sealing properly. If the door is not sealed, the unit may not cool prope...

  • Page 24

    User guide door adjustments 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service 4. Remove four screws from hinge holes on the opposite side. Reinstall into holes where the hinge was removed. Take care not to scratch cabinet. Remove bottom hinge: 1. Remov...

  • Page 25

    User guide first use 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service first use all u-line controls are preset at the factory. Initial startup requires no adjustments. Notice u-line recommends discarding the ice produced during the first two to three ...

  • Page 26

    User guide control operation 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service control operation up down light power clean alert led control function guide function command display/options on/off press and release unit will immediately turn on or off. ...

  • Page 27

    User guide ice 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service ice ice cube thickness adjustment interval - as required notice ice thickness adjustment should only be made one increment at a time. Allow ice maker production to stabilize for 24 hours ...

  • Page 28

    User guide sabbath mode 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service l sabbath mode u-line clear ice machine models are star-k certified and can be used during the sabbath. View a full list of star-k certified u-line units at www.Star-k.Org. To pr...

  • Page 29

    User guide airflow and product loading 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service airflow and product loading notice the unit requires proper airflow to perform at its highest efficiency. Do not block the front grille at any time, or the unit wi...

  • Page 30

    User guide cleaning 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cleaning exterior cleaning vinyl clad (black or white) models clean surfaces with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft ...

  • Page 31

    User guide cleaning 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service notice use only u-line ice machine cleaner (part no. 37050, available from your dealer or direct from your local parts distributor. To locate a parts distributor near you, visit www....

  • Page 32

    User guide cleaning 3 u-line.Com safety • installation & integration • operating instructions • maintenance • service 9. When water begins flowing over the evaporator (approximately 3 minutes), pour 1 packet of clr cleaner into the water trough. The cleaning process will last approximately 45 minute...

  • Page 33

    User guide cleaning condenser 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service cleaning condenser interval - every six months to maintain operational efficiency, keep the front grille free of dust and lint, and clean the condenser when necessary. Depe...

  • Page 34

    User guide extended non-use 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service extended non-use vacation/holiday, prolonged shutdown the following steps are recommended for periods of extended non-use: 1. Remove all consumable content from the unit. 2. ...

  • Page 35

    User guide accessories 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service accessories 80-51002-00 accessories - clear ice maker refresh kit us$98.99 37050 accessories - clear ice machine cleaner - 1 box of 6 packets us$39.00 23054-01 accessories - stain...

  • Page 36

    User guide troubleshooting 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service troubleshooting before calling for service if you think your u-line product is malfunctioning, read the operating instructions section of this guide to clearly understand the ...

  • Page 37

    User guide troubleshooting 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service control options on/off: press power key and unit will turn off or on. Light: when applicable (table: basic settings) hit the light key and light will remain on for 3 hours. Sh...

  • Page 38

    User guide warranty 1 u-line.Com safety • installation & integration • operating instructions • maintenance • service warranty u-line corporation limited warranty 1. U-line corporation (“u-line”) warrants each u-line product to be free from defects in materials and workmanship for a period of one ye...

  • Page 39

    User guide warranty 2 u-line.Com safety • installation & integration • operating instructions • maintenance • service 7. If a product defect is discovered during the applicable warranty period, you must promptly notify either u-line at 8900 n. 55th street, milwaukee, wisconsin 53223 usa or at +1.800...