U-Line SP-18 Specifications
ICE MAKER
Model SP18 - Low Profile
FEATURES
BENEFITS
1.
High ice production
Produces up to 20 lbs. of ice per day and stores 12 lbs.
2.
Short/low profile
Takes up minimal amount of space.
3.
Front vented for built-in installation
No need for extra fans or special venting to the outside of cabin.
Do not obstruct front grille.
4.
Corrosive resistant components
Hinges and fasteners are stainless steel to prevent corrosion.
5.
UV resistant components
White model has metal door frame and handle, and specially coated grille
to withstand adverse effects caused by the sun.
6.
No drain required for water
Easy and inexpensive to install; only needs 1/4" outside diameter water
line connection.
7.
Conserves water
Only 2-1/2 gallons of water required to produce approximately 20 lbs. of ice.
8.
Field reversible door
Fits any location, easy access. Zero clearance door swing.
9.
Adjustable temperature control
Permits adjustment of daily ice rate.
10. 1/2 inch wide flange
Surrounds front of cabinet for easy mounting in surrounding cabinets.
ADDITIONAL FEATURES:
• Travel pin keeps door securely closed
• Available in 110/115V 60 cycle or 220/230V 50/60 cycle
• Shipping weight: 68 lbs.
• Vinyl clad steel cabinet
• Available in white or black
• See through, removable ice bucket
All specifications subject to change without notice.
8900 N. 55th Street
Milwaukee, Wisconsin 53223
(414) 354-0300
FAX (414) 354-7905
www.u-line.com
ICE MAKER
* POWER CORD
*
ON BACK OF UNIT
18-7/8
(47.9)
HT/W
FLANGE
18-1/2
(47.0)
8-1/
(20.
1/2
(1.3)
13-13/16
(35.1)
15-1/8
(38.5)
22
(55.8)
24-13/16
(60.5)
15-1/16
(38.2)
W/FLANGE
* WATER LINE
INLET
ADD 1-1/2" TO DEPTH FOR
WATER LINE CONNECTION
INCHES (CENTIMETERS)
KCC Printed in U.S.A.
P/N SS-SP18