U-Reach Silver Fox PRO User Manual - page 14

3Operation Guide

14

1.2.3. Asynchronous Settings 

(Function4.5.4) 

The conditions of executing 

"Asynchronous Copy"

Users can select "Disable" to close Asynchronous 

copy or "Enable" to activate the function. 

If the 

setup is "Enable", and the data in source is smaller 

than system's buffer memory, it will automatically 

use asynchronous mode to do copy.

 If the setting 

is "Disable", no matter what the content size is, the 

system will keep synchronous copy.

Note:

❶ The buffer memory of different product models may be different. 

❷ About the "buffer memory", please refer to page 55~56, 

Specification.

2. How to Prevent from Failed Duplication

(1) Stable Devices 

a) Good Connector

No matter are the adapter, the extension cord, or the card reader, all of them must have 

good quality to make sure of good connection.

b) Stable Flash 

Use the flash device of stable quality.

c) Good Source

Make sure your source is a good source.

Good source