V-fit STv1-P Assembly & User Manual - Maintenance
MAINTENANCE
BELT ADJUSTMENT
*If your Belt tends to walk to the right, then the adjustment of the Right Belt Tension Bolt (inside Part 21) is
necessary by turning clockwise. We recommend adjustment of 1/4 turn at a time, with a test to follow. If
your Belt continues to walk to the right, simply adjust the Left Belt Tension Bolt (inside Part 19), by turning
1/4 turn anti-clockwise, with a test to follow.
*If your Belt tends to walk to the left, turn the Left Belt Tension Bolt (inside Part 19) clockwise 1/4 turn at a
time. If the Belt continues to walk to the left, simply adjust the Right Belt Tension Bolt (inside Part 21) anti-
clockwise.
*If your Belt appears to be loose, simply tighten both bolts evenly 1/4 turn. If it appears tight, simply loosen
both bolts evenly 1/4 turn.
*To reduce the friction (sticking) of the Belt and minimize wear, a silicone lubricant or WD- 40, may be
applied directly to the Deck and underside of the Belt.
IMPORTANT: Friction will be increased by the time and frequency of using the treadmill. We
strongly recommend lubrication of the Deck every three months to keep the treadmill in good
condition.
NOTE: The lubricant may be applied whenever sticking occurs. To apply, simply lift up the side of the Belt
and spray onto the Deck and the underside of the Belt.