V-fit STv1-P Assembly & User Manual - Before You Start
BEFORE YOU START
Tools
Most V-fit products are supplied with basic tools, which will enable you to successfully assemble your
product. However, you may find it beneficial to have a soft-headed hammer and perhaps an adjustable
spanner handy as this may help.
Prepare the Work Area
It is important that you assemble your product in a clean, clear, uncluttered area. This will enable you to
move around the product while you are fitting components and will reduce the possibility of injury during
assembly.
Work with a Friend
You may find it quicker, safer and easier to assemble this product with the help of a friend as some of the
components may be large, heavy or awkward to handle alone.
Open the Carton
Carefully open the carton that contains your product, taking note of the warnings printed on the carton care
to ensure that the risk of injury is reduced. Be aware of sharp staples that may be used to fasten the flaps
as these may cause injury. Be sure to open the carton the right way up, as this will be the easiest and
safest way to remove all the components.
Unpack the Components
Carefully unpack each component, checking against the parts list that you have all the necessary parts to
complete the assembly of your product.
Please note that some of the parts may be pre-fitted to major components, so please check carefully before
contacting our CUSTOMER SUPPORT team.
In any event, please do not return the product to your retailer before contacting us first.
Tel: - 0871 222 0881 or
Fax: - 01535 637722 or
e-mail: - beny@benysports.co.uk
CUSTOMER SUPPORT is open from 9.00am to 5.00pm from Monday to Friday
Beny Sports Co. UK Ltd.
Unit 8, Riparian Way,
The Crossings, Cross Hills,
West Yorkshire.
BD20 7BW