1. DL manuals
  2. V-Tec
  3. Security System
  4. DT601
  5. User Manual

V-Tec DT601 User Manual

Manual is about: 2-Wire Video Outdoor Station

Summary of DT601

  • Page 1

    Dt601/id/fe dt601f/id/fe rf card rf card english user manual 2-wire video outdoor station dt-eng-601(f)id-fe-v1 161108.

  • Page 2

    -2- side view mounting box id card window rainy cover dt601/kp/fe camera lens speaker nameplate call button microphone 93 mm 182 mm night light rf card id card window rf card 30 mm dt601f/id/fe 220 mm 120 mm rf card camera lens speaker nameplate call button microphone night light screws for panel mo...

  • Page 3

    -3- 3.Door station mounting 1 2 4 3 drill holes in the wall to match the size of screws and attach the rainy cover to the wall. Attach the panel to the rainy cover use the screwdriver and the screw to fix the panel connect the cable correctly dt601/id/fe mounting • lock control jumper: to select the...

  • Page 4

    -4- dt601f/id/fe mounting 1 2 4 3 drill a hole in the wall to match the size of the mounting box and attach to the wall. Attach the panel to the mounting box and use screws supplied to fix the panel connect the cable correctly placing name label acdbmleader (acdb_mleader_class) acdbmleader (acdb_mle...

  • Page 5

    -5- 4. System wiring and electric lock connection basic connection bus(im) bus(ds) pc6a ac~ - + l1 l2 pl s+ s- doorbell button switch code=00, dip6=on 1 2 3 4 5 6 on dip l2 l1 dip switches electric lock connection door lock controlled with internal power note: 1. Electronic lock of power-on-to-unloc...

  • Page 6

    -6- unlock parameter setting(set on monitor) lock take off the jumper power supply bus pl s+ s- door lock controlled with dry contact note: 1. The external power supply must be used according to the lock. 2. The inside relay contact is restricted to ac or dc 24v/1a. 3. The jumper must be taken off b...

  • Page 7

    -7- multi door stations connection 100~240vac dbc4a1 a b c d off on impedance switch bus(im) bus(ds) pc6a ac~ 1# camera 2# camera 3# camera 4# camera l1 l2 pl s+ s- l1 l2 pl s+ s- l1 l2 pl s+ s- l1 l2 pl s+ s- (device address:3) (device address:2) (device address:1) (device address:0) basic in-out w...

  • Page 8

    -8- with dbc4a1 wiring mode rf card code=0 off on off on dbc4a1 a b c d dbc4a1 a b c d impedance switch impedance switch (device address:0) note:here we take dt47mg(the monitor) for example. 100~240vac bus(im) bus(ds) pc6a ac~ code=2 code=1 code=3 code=12 code=14 code=13 code=15.

  • Page 9

    -9- notethatthisfunctionrequiresthemonitorwithfish-eyefunctiontosupport. Itisavailabletoadjustthedisplaymodeforviewingimagesatafish-eyedoorstationbyusingthe 5 direction pad button. Here are some examples: touch icon to zoom the center position. Note: the edge of pantilt image will not be displayed. ...

  • Page 10

    -10- 1 2 3 4 5 6 7 8 9 1) touch area 4: zoom area 4, the lens moves to area 6, and then return to area 4;(as below picture) 2) touch area 6: zoom area 6, the lens moves to area 4, and then return to area 6;(as below picture) note: touch the screen again to exit the panview mode. Note: touch the scre...

  • Page 11

    -11- 6. Id card registration introduction: • up to 320 user cards can be registered by the door station. • easy management with led status and sound hints. • there are two master cards, one master card add card and one master card delete card, when registered new master cards, the old master cards a...

  • Page 12

    -12- access initialization (delete all user cards): show the master card delete card to id card window in standby mode. Show the master card add card to id card window. (at this time show the master card delete , it will return to the "delete user cards" state) show the master card add card to id ca...

  • Page 13

    -13- notice:1.Automatically returns to standby mode after format completed. 2.It will return to standby mode if no operation within 20s.Or press call button to exit the status of setting and start to call the monitor. 1. If show the authorized user card,the buzzer will sound of beep+,and the led bac...

  • Page 14

    -14- 9. Precaustions 10. Specifications • please clean the unit with soft cotton cloth, don't use the organic impregnant or chemical clean agent. If necessary, please use a little pure water or dilute soap water to clean the dust. • the unit is weather resistant. However do not spray high pressure w...

  • Page 15

    -15- rf card the farest monitor b a c dbc4a1 monitor monitor monitor with two or four monitors 100~240vac bus(im) bus(ds) pc6a ac~ 11. Cables requirements the maximum distance of the wiring is limited in the dt system. Using different cables may also affect the maximum distance which the system can ...

  • Page 16

    The design and specifications can be modified without notice to the user. Right to interpret and copyright of this manual are reserved. Dt-eng-601(f)id-fe-v1 161108.