V-Tec DT601 User Manual - page 11
-11-
6. ID Card Registration
Introduction:
• Up to 320 user cards can be registered by the door station.
• Easy management with LED status and sound hints.
• There are two master cards, one
MASTER CARD ADD
card and one
MASTER
CARD DELETE
card, When registered new master cards, the old master cards
are invalid automatically.
• Card reading distance is from 3 to 5 cm.
• The master cards are necessary when you add or delete user cards. Please
keep it well for future use.
Authorize master cards:
The color of
background indicator
beep+
beep+,beep
beep+,beep
Press and hold the
Call Button
to power-on.("Beep+",means
that enter the setting state)
Press and hold again the
Call Button
3 seconds.
Press and hold the
Call
Button
3 seconds.(At this
time press the
Call Button
will
to start the aging function)
(blue)
The color of
background indicator
The color of
background indicator
(white)
Notice:it will return to standby mode if no operation within 10s.Or press Call Button to exit the state of
setting and start to call the monitor(except step 3).
(blue)
beep+
The color of
background indicator
(yellow)
ShowthefirstcardtoID
card window, it will be set to
MASTER CARD ADD
card.
beep+
The color of
background indicator
(blue)
Show the second card to ID
card window, it will be set to
MASTER CARD DELETE
card.
By default,there are two master cards marked
MASTER CARD ADD
and
MASTER CARD DELETE
,but you
should know that the master card can be authorized by users at any time.That means any two user cards
can be authorized to master cards,When registered new master cards, the old master cards are invalid
automatically.