1. DL manuals
  2. V-tech
  3. Intercom System
  4. DT601FE/KP
  5. User Manual

V-tech DT601FE/KP User Manual

Manual is about: 2-Wire Video Outdoor Station

Summary of DT601FE/KP

  • Page 1

    English user manual 2-wire video outdoor station dt601fe/kp 1 4 5 6 9 8 0 # 7 2 3 * dt-eng-601fe/kp-v1 151019.

  • Page 3

    Contents 1.Parts and functions............................................................................................. 1 2.Terminal descriptions .......................................................................................... 1 3.Door station mounting ....................................

  • Page 4

    - 1 - 1.Parts and functions dt601fe/kp side view mounting box 220 mm 120 mm 1 4 5 6 9 8 0 # 7 2 3 * camera lens speaker touch sensitive digital keypad nameplate call button microphone night light screws for panel mounting 1 4 5 6 9 8 0 # 7 2 3 * 2.Terminal descriptions 1 2 3 lock control jumper bus ...

  • Page 5

    - 2 - 3.Door station mounting acdbmleader (acdb_mleader_class) acdbmleader (acdb_mleader_class) 1 2 4 3 drill a hole in the wall to match the size of the mounting box and attach to the wall. Attach the panel to the mounting box and use screws supplied to fix the panel connect the cable correctly pla...

  • Page 6

    - 3 - basic connection 4.System wiring and connections bus(im) bus(ds) pc6 ac~ - + l1 l2 pl s+ s- doorbell button switch 1 2 3 on dips electric lock connection eb * lock bus pl s+ s- jumper position in 2-3 1 2 3 door lock controlled with internal power note: 1. Electronic lock of power-on-to-unlock ...

  • Page 7

    - 4 - lock take off the jumper power supply bus pl s+ s- unlock parameter setting(set in monitor) door lock controlled with dry contact note: 1. The external power supply must be used according to the lock. 2. The inside relay contact is restricted to ac or dc 24v/1a. 3. The jumper must be taken off...

  • Page 8

    - 5 - multi door stations connection 100~240vac dbc4a a b c d off on impedance switch bus(im) bus(ds) pc6 ac~ 4# camera l1 l2 pl s+ s- (device address:3) 3# camera l1 l2 pl s+ s- (device address:2) 2# camera l1 l2 pl s+ s- (device address:1) 1# camera l1 l2 pl s+ s- (device address:0) basic in-out w...

  • Page 9

    - 6 - with dbc4a wiring mode code=0 off on off on dbc4a a b c d dbc4a a b c d impedance switch impedance switch (device address:0) note:here we take dt47m(the monitor) for example. 100~240vac bus(im) bus(ds) pc6 ac~ code=2 code=1 code=3 code=12 code=14 code=13 code=15 1 4 5 6 9 8 0 # 7 2 3 *.

  • Page 10

    - 7 - note that this function requires the monitor with fisheye function to support. Press call button on outdoor station and the monitor rings with screen on, or during monitoring state, the visitors' image will be shown on screen: in five direction pad mode, you can zoom in or zoom out the range o...

  • Page 11

    - 8 - order setting items setting range default value setting code 1 reset all settings 1234 - 00 2 setting the master code 1 ~ 12 digits valid keys:0 ~ 9 1234 01 3 setting the key illumination time 10 to 99 seconds/ continually lit 10 seconds 02 4 setting the unlock time 01 to 99 seconds 1 seconds ...

  • Page 12

    - 9 - 1 4 5 6 9 8 0 # 7 * 2 3 input the master code. (default: [ ] +[#] ) - all settings will restore to their default value. - when power on or activate the reset all setting item,the keypad checking will carry out, during this time,the key illumination will blink and the touching operation is forb...

  • Page 13

    - 10 - input the master code. (default: [ ] +[#]) beep+, beep beep+, beep beep+, beep beep+, beep beep+, beep beep+ beep+ beep+ beep+ 7.Reset code setting 8. Function setting 6.Setting operation tone (default on) (default normal) (default 0(opened)) input the setting code. Inputting of code input th...

  • Page 14

    - 11 - input the master code. (default: [ ] +[#]) beep+, beep beep+, beep beep+, beep beep+ beep+ 10.Interference resistant grade setting input the setting code. Input the setting code. 9. Call tone setting 08+# 0/1 1+# 09+# inputting of code (ex.: 3) range:0~5 3+# inputting of code (ex.: 1) range:0...

  • Page 15

    - 12 - input the master code. (default: [ ] +[#]) beep+, beep beep+, beep beep+, beep beep+ beep+ 14.Night light level setting input the setting code. Input the setting code. 13. Display scene setting 12+# 0/1 1+# 13+# inputting of code (ex.: 3) range:0~5 3+# inputting of code (ex.: 1) range:0~2 (de...

  • Page 16

    - 13 - input the master code. (default: [ ]+[#] ) beep+, beep beep+, beep beep+, beep beep+, beep beep+, beep beep+ beep+ beep+ beep inputting of code (ex.: 2011) 1~12 digits inputting of code (ex.: 2012) 1~12 digits 18.Setting the code for user group1 19.Setting the code for user group2 17.Setting ...

  • Page 17

    - 14 - input the master code. (default: [ ]+[#] ) beep+, beep beep+, beep beep+, beep beep+ beep+ 21.Call address setting input the setting code. Input the setting code. 20.Work mode setting 0+# - work mode setting: 0(a partment)/1:(villa). (white) the color of key indicator (yellow) the color of ke...

  • Page 18

    - 15 - 7.Unlock operations when the registered user code has been input using the keypad (1~12 digits), the led background indicator lights up, the buzzer sounds,and the electric door strike is unlocked.(note that you should press "#" button(if "#" button is set to confirm button) after input the un...

  • Page 19

    - 16 - the farest monitor b a c dbc4a monitor monitor monitor with two or four monitors 100~240vac bus(im) bus(ds) pc6 ac~ 1 4 5 6 9 8 0 # 7 2 3 * 10.Cables requirements the maximum distance of the wiring is limited in the dt system. Using different cables may also affect the maximum distance which ...

  • Page 20

    The design and specifications can be modified without notice to the user. Right to interpret and copyright of this manual are reserved. Dt-eng-601fe/kp-v1 151019.