V-tech DT601FE/KP User Manual - page 10
-
7
-
Note that this function requires the monitor with fisheye function to support.
Press
CALL button on outdoor station and the Monitor rings with screen on, or during
monitoring state, the visitors' image will be shown on screen:
In five direction pad mode, you can zoom in or zoom out the range of monitoring to
identify everyone at the entrance.
When you press any lattice of
the five direction pad, the lattice
screen will be enlarged to full
screen.
Press to return to the full screen
mode; Press , , to move, in
order to
see individuals up close.
5. Fisheye Camera Function
6. Functions Setting Up
This section explains the settings of each function,please refer to the following table:
About the setting mode:
Input the master code to switch to the setting mode, and input the corresponding setting code to perform the
settings for the function you want. After settings have been made, input the following setting codes to continue the
setting operation. Press " " to exit the setting mode.
• The example is set as cancel button and # as confirm button,please refer to */# function
setting for detail information.
• Forbid to slide to touch the digital keypad,it may cause mistaken key,the correct operation is
using your finger to press the digital you desired.
• You should press“confirm”button after finish inputting the code number each
time,otherwise,the operation will be canceled automatically in 10s.