Vacon X5 User Manual - page 65
X5 AC Drive User’s Manual
Chapter 6: Using Macro Mode / Quick Start
DPD00089A
- 63 -
© 2009 Vacon Incorporated All Rights Reserved
6.3
Macro Mode Applications and Included Parameters
The tables below list the different applications and the Level 1 parameters included in the macro for
that application. The Factory Application macro is the core package (listed in Table 6-1); the other
macros include the Factory Application macro parameters as well as the ones listed in their
respective tables (Tables 6-2, 6-3, 6-4, 6-5, and 6-6). The macro mode applications are as follows:
Factory Application (Table 6-1)
Fan Application (Table 6-2)
Fan with PI Application (Table 6-3)
Pump Application (Table 6-4)
Pump with PI Application (Table 6-5)
Vector Application (Table 6-6)
Table 6-1: Factory Application Macro
Para. #
Parameter Name
Default
See Page
001
Model Number
Read-only
102
Output Freq
Read-only
103
Output Voltage
Read-only
104
Output Current
Read-only
105
Drive Load
Read-only
106
Load Torque
Read-only
107
Drive Temp
Read-only
111
DC Bus Voltage
Read-only
201
Input Mode
Local Only
202
Rev Enable
Forward
301
Min Frequency
0.0 Hz
302
Max Frequency
60.0 Hz
303
Preset Freq 1
5.0 Hz
402
Accel Time 1
5.0 sec
403
Decel Time 1
5.0 sec
502
Voltage Boost
0.0%
610
Timed OL Select
Std Ind 60s
700
Vmet Config
Freq Out
705
Relay 1 Select
Drv Fault
706
Relay 2 Select
Drive Run