Installation and user guide camera and electronic products for integrators ©2010 vaddio - all rights reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing subject to change. Vaddio, wallview, hsds, quick-connect, ezim, productionview, preview...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 2 of 12 unpacking carefully remove and identify the following parts for the wallview ccu he100 system: • one (1) panasonic aw-he100 – modified 12 vdc version - with ir remote • one (1) quick-connect ccu (998-1...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 3 of 12 quick-connect ccu front panel controls (left to right): tally light: the blue led tally light on the front panel is tied to the tally contacts on the rear panel allowing the user to easily track which ...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 4 of 12 rear panel connections and controls (left to right): power supply input: 36v 2.78 amp power supply on a 5.5mm od x 2.5mm id connector. Power on rj-45: power is provided on a cat. 5 cable to ezim ccu. R...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 5 of 12 installation all quick-connect products are specifically designed for installation on a vertical wall surface with cat-5 cable connectivity for power, video and control signaling. Installation is simpl...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 6 of 12 step 5: confirm that the cat-5 cables are terminated correctly, by testing them with a continuity tester. Next, connect the break out cables to the appropriate ports. The break out cable for the he 100...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 7 of 12 setting the format and output settings (continued): note: only values that are valid for the specific camera firmware will be saved. Confirmation of the format or output saved can be verified by turnin...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 8 of 12 fcc, ices-003 compliance and ce declaration of conformity for vaddio quick-connect ccu and ezim ccu products fcc part 15 compliance this equipment has been tested and found to comply with the limits fo...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 9 of 12 appendix 1: cable pin-outs for the quick-connect ccu system quick-connect ccu pin-out assignments: power connector rj-45 pin signal 1) power + 2) power - 3) power + 4) power - 5) power + 6) power - 7) ...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 10 of 12 ezim ccu pin-out assignments power connector rj-45 pin signal 1) power + 2) power - 3) power + 4) power - 5) power + 6) power - 7) power + 8) power - rs-232 in connector pin signal - rs-232 1) not use...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 11 of 12 warranty information hardware* warranty - one year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of pur...
Wallview ccu he100 quick-connect ccu he100 installation and user guide 341-789 rev. B page 12 of 12 9433 science center drive, minneapolis, mn 55428 toll free: 800-572-2011 ▪ phone: 763-971-4400 ▪ fax: 763-971-4464 www.Vaddio.Com ©2008 vaddio - all rights reserved. Reproduction in whole or in part w...