Vaillant auroMATIC VRS 560 Operating And Installation Manual - page 9
9
Operating manual – auroMATIC 560 0020008427_01
5.4.5 Display,
service/diagnostics
level
The actuators and sensors should be checked by the
technician expert.
You can access the service/diagnostics level by simulta-
neously pressing the programming button "P" and the
dial for roughly 3 seconds. All actuators and sensors can
be controlled and checked in this level (see Chapter 7 in
the installation instructions).
The display returns to the main operating level if you
press the programming button.
5.4.6 Display,
installer
level
The parameters at installer level should only be adjust-
ed by an expert technician.
You can access the installer level by pressing the pro-
gramming button "P" for at least 3 seconds.
Press the programming button briefly to return to the
basic display.
5.5 Settings
5.5.1
Calling up settings and operating values
You can call up the values set at the info level succes-
sively by pressing the info button repeatedly.
Once called up, the information remains in the display
for roughly five seconds then the display returns to the
main operating level.
Display
Settings
Cylinder temperature target value
Yield
Cylinder sensor 1 temperature
Cylinder sensor 2 temperature
Cylinder sensor 3 temperature
(if connected)
Table 5.1 Values for settings
Display
Settings
Collector sensor 1 temperature
Collector sensor 2 temperature
(if connected)
Operating hours, solar pump 1
Operating hours, solar pump 2
The current date is only displayed in the
following cases
- a valid date is entered during start-up
and
- the calendar has been activated.
Timer program for heating window
Table 5.1 Values for settings (continued)
Further displays will be shown here depending on how
many timer programs you have set (see Sections 5.5.3
and 5.5.4).
5.5.2 Settings at main operating level
You can adjust the following settings in the main oper-
ating level:
–
Cylinder temperature target value,
–
Operating mode,
–
Current day of the week,
–
Current time
When you call up a setting, it can be viewed and/or
changed for roughly five seconds before the basic dis-
play at the main operating level reappears automatical-
ly. Click the dial within the five second period to display
the next setting.
Operation 5