Instructions for use ecotec plus wall hung open vent condensing boiler gb for the owner.
Instructions for use ecotec plus / 0020020829_03 2 appliance characteristics . . . . . . . . . . . . . . . . . . . . . 2 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 notes on the documentation . . . . . . . . . . . . . . . . 3 1.1.1 other instruction supplied with this ...
3 instructions for use ecotec plus / 0020020829_03 1 introduction 1.1 notes on the documentation to ensure clarity of information in instructions a new european standard of advice and symbols is being intro- duced. To ensure compliance with this new standard the following details are included.The fo...
Instructions for use ecotec plus / 0020020829_03 4 2 safety 2.1 setup and adjustments installation and adjustment of the boiler as well as service, maintenance and repair of the boiler may only be carried out by a competent person in accordance with the gas safety (installation and use) regulations ...
5 instructions for use ecotec plus / 0020020829_03 3 information on installation and operation 3.1 factory guarantee 3.1.1 two year guarantee for ecotec plus appliances vaillant undertakes to rectify any manufacturing defect that occurs within twenty-four months of the installation date. For the 2nd...
Instructions for use ecotec plus / 0020020829_03 6 4 operation 4.1 overview of controls on ecotec plus 1 8 7 6 5 4 2 3 fig. 4.1 ecotec plus controls for access to the controls open the front flap by pulling at the centre of the case strip. 1 display indicating the current heating flow temperature, t...
7 instructions for use ecotec plus / 0020020829_03 4.3 turning the boiler on 2 1 fig. 4.4 switching on the appliance • turn on appliance at control (1). When you switch on the appliance, the current operat- ing status appears in the display (2). To adjust the appliance according to your requirements...
Instructions for use ecotec plus / 0020020829_03 8 h note! Vaillant offer room thermostat/time control accessories which give accurate and economic room temperature control as well as improved comfort. The boiler will now operate automatically to provide central heating for the conditions selected o...
9 instructions for use ecotec plus / 0020020829_03 if the burner fails to ignite after five attempts, the device does not start up and switches to “fault”. This is indicated by the fault code “f.28” or “f.29” in the display. The display also shows the flame symbol with a cross through it (1). Automa...
0020020829_03_gb 03 2008.
