Ivic-5 installation manual vais vais t te ec ch hn no ol lo og g y y www.Vaistech.Com • lexus • toyota • copyright (c) 2003-2012 vais technology published december 5, 2012 for 5 generation of toyota/lexus navigation system ic i.
Do not disassemble or alter doing so may result in an accident, fire or electric shock. Do not block your view do not mount product or any added audio and/or video equipment where it can block your view through the windshield or your view of dashboard indicators and displays. Do not block the airbag...
Vais technology shall not be liable for any special, direct, indirect or consequential damages or damages to persons or property arising out of the use of the product, or for any loss of business or profits, even if vais technology has been advised of the possibility of such damages. Vais technology...
Connections 4 connecting ivic used for ivic mode programming power and audio wiring harness service port usb 2.0 host a/v 2 port a/v 1 port / ipod interface (if available) video 3/camera port (if equipped) digital video harness ! This is not firewire port! Do not use this connector for any firewire ...
Power and audio wiring harness bluetooth module (if equipped) vgpu heatsink (do not cover it!) allow free airflow digital video harness (must be connected) hdmi cable a/v1 video harness or ipod interface harness usb cable (android device charging only if applicable) usb 2.0 extension cable or ipod i...
Connections 6 connecting ivic to ivic digital video connector to factory multi-display unit to factory harness from navigation ecu (if present) digital video harness (included) +12v camera power supply camera power supply ground +12v camera power supply camera power supply ground a/v 2 (audio/video)...
Connections 7 head unit (radio receiver) connection diagram used for most 2006-2009 lexus/toyota vehicles connecting ivic to head unit (for lexus/toyota vehicles) a a factory audio harness (if present) plug into head unit (connector “b”) 12-pin connector lexus gx 470 radio receiver shown. Locate con...
Installation we strongly recommend that you install the unit in an easily accessible location, so you can later upgrade the unit or re-program it in case of incorrect programming. Important i 8 ivic-5d programming (mode 1) ivic-5d programming steps: @ properly install ivic-5d unit. @ put the “left” ...
! Velcro fasteners are not included ! Vais technology strongly recommends grounding the unit to the car chassis for best results. Note warning ! We strongly recommend to ground ivic to the vehicle’s chassis i ! Mounting unit using velcro fasteners carpet or car chassis “soft” velcro fastener “hard” ...
About ivic 10 ivic video graphics mode cd-mp3 emulation mode universal audio/video inputs android mode ivic-5 cd-mp3 emulation manual ivic-5 av sources manual ivic-5 android mode manual follow follow follow cd-mp3 emulation is used for mass storage device integration or for ipod/iphone integration (...
