Vais Technology iVIC-5D Installation Manual - page 6
Other manuals for iVIC-5D:
Owner's Manual
Manual is about: Vehicle Infotainment Center
of
10
Connections
6
Connecting iVIC
To iVIC
Digital Video
Connector
To Factory
Multi-Display Unit
To Factory
harness
from Navigation ECU
(if present)
Digital Video Harness
(included)
+12V Camera Power Supply
Camera Power Supply Ground
+12V Camera Power Supply
Camera Power Supply Ground
A/V 2
(Audio/Video)
Harness
(NOT INCLUDED)
Video 3 / Camera
Harness
(NOT INCLUDED)
A/V1
(Component Video )
Harness
(NOT INCLUDED)
If Composite is selected in A/V1 source
as Input Signal Type, then you must
use Green connector for Composite Video
Digital Video Cable MUST BE CONNECTED to Factory Multi-Display Unit,
and to iVIC for proper operation of iVIC and factory components.
Navigation ECU (if present),
To iVIC AV2 Port
To iVIC Camera Port
(if equipped)
To iVIC
AV1 Port / iPod interface
Port