Vais Technology SoundLinQ3 SL3sat Owner's manual - page 11
10
iOS Devices controls
TRACK+
TRACK-
and
Select the desired track
(Maximum number of tracks is 99 for CD changer Emulation mode, 999 for MD changer Emulation mode).
You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button.
The track will change after a brief pause when you stop pressing the button.
NOTE: If a playlist only contains one track, the [TRACK+] / [TRACK-] buttons will not function.
DISC+
DISC-
and
Select the desired playlist
(Maximum number of playlists is 99).
You can fast switch through playlists by repeatedly pressing the [DISC+] / [DISC-] button.
The new playlist will start after a brief pause when you stop pressing the button.
NOTE: If there are no songs in a playlist the unit will jump to the next playlist.
RPT
Activates iPod “Repeat One” function
RAND
Activates iPod “Shuffle” function.
NOTE: Shuffle all songs in the active playlist. iPod starts playing songs from your entire playlist in random order,
skipping audiobooks.
DISC RPT
Activates iPod “Repeat All” function.
NOTE: Repeats all songs in active playlist.
DISC RAND
Select the desired track title display mode. You can choose between Song Title, Artist Name, or Album Name.
Note: Track Title information can ONLY be displayed on Radio LCD or Navigation screen that support CD orMD
changers with CD-Text
or MD-Text.
SCROLL UP
SCROLL DOWN
and
Fast Forward/Rewind the song
NOTE: For vehicle not equipped with [DISC+] and [DISC-] buttons, if “DISCSCAN”
function is active use
[SCROLL UP] and [SCROLL DOWN] as [DISC+] and [DISC-]
to select the desired playlist
NOTE: if “ SCAN” function is active use [SCROLL UP] and [SCROLL DOWN]
as “TRACK +10” and “TRACK -10” to select the desired song
DISC SCAN
SCAN
NOTE: if “ SCAN” and “DISC SCAN” functionare active use [SCROLL UP] and
[SCROLL DOWN] as “TRACK +50” and “TRACK -50” to select the desired song
DISC SCAN
SCAN
Displayed Errors (available only as a TEXT message)
CD/MD Changer Emulation
iPod/iPhone (as a Bluetooth Device) is not connected to SL3B
Check BT Device
11
iOS Devices controls
TRACK+
TRACK-
and
Select the desired track
(Maximum number of tracks is 99 for CD changer Emulation mode, 999 for MD changer Emulation mode).
You can fast switch through tracks by repeatedly pressing the [TRACK+] / [TRACK-] button.
The track will change after a brief pause when you stop pressing the button.
NOTE: If a playlist only contains one track, the [TRACK+] / [TRACK-] buttons will not function.
DISC+
DISC-
and
Select the desired playlist
(Maximum number of playlists is 99).
You can fast switch through playlists by repeatedly pressing the [DISC+] / [DISC-] button.
The new playlist will start after a brief pause when you stop pressing the button.
NOTE: If there are no songs in a playlist the unit will jump to the next playlist.
RPT
Activates iPod “Repeat One” function
RAND
Activates iPod “Shuffle” function.
NOTE: Shuffle all songs in the active playlist. iPod starts playing songs from your entire playlist in random order,
skipping audiobooks.
DISC RPT
Activates iPod “Repeat All” function.
NOTE: Repeats all songs in active playlist.
DISC RAND
SCROLL UP
SCROLL DOWN
and
Fast Forward/Rewind the song
NOTE: For vehicle not equipped with [DISC+] and [DISC-] buttons, if “DISCSCAN”
function is active use
[SCROLL UP] and [SCROLL DOWN] as [DISC+] and [DISC-]
to select the desired playlist
NOTE: if “ SCAN” function is active use [SCROLL UP] and [SCROLL DOWN]
as “TRACK +10” and “TRACK -10” to select the desired song
DISC SCAN
SCAN
NOTE: if “ SCAN” and “DISC SCAN” functionare active use [SCROLL UP] and
[SCROLL DOWN] as “TRACK +50” and “TRACK -50” to select the desired song
DISC SCAN
SCAN
Displayed Errors (available only as a TEXT message)
CD/MD Changer Emulation
iPod/iPhone (as a Bluetooth Device) is not connected to SL3B.
Check BT Device
NOTE: Folder/Disc Title information may not display properly if song selected directly from the iOS device.
Some applications may not refresh Folder/Disc Title when the song changes.
NOTE:
SL3B automatically connects to the last connected device. In case SL3B does not connect, you can force
connection by activating and then deactivating “SCAN” button on the factory radio.