Vais Technology SoundLinQ3 SL3sat Owner's manual - page 11
To display the song title and artist name that is currently playing, press the
TEXT button. If the information is available
from the current satellite channel, it will be displayed. Song title and artist name can display a maximum of 16
alphanumeric characters each.
TRACK+
TRACK-
and
Use the SEEK-TRACK button on the stereo head unit to select the next available channel. The unit will automatically
skip channels that are not available.
To change the category of channels you would like to listen to, press either the TYPE < or TYPE > button.
TYPE SCAN
and
No signal or acquiring satellite signal
-NO SIGNAL-
Satellite receiver is not connected or does not respond
-TUNER ERR-
Displayed Messages/Errors
MANUAL TUNING
TYPE
TYPE
Use the
TUNE knob on the head unit to select channels. You can rapidly scan channels by turning the knob faster in the
direction you wish to scan.
DISPLAYING SONG TITLE AND ARTIST NAME
To select a preset, press the desired preset button.
SELECTING PRESETS
CHANNEL SEEK
CHANGING CATEGORIES
Scan channels throughout the selected category.
Presets
NOTE: Beep indicates successfully accomplished operation. If you do not hear a beep, please repeat the above steps.
@
Select the desired channel
@
Press and hold the preset button where you would like to store the current channel.
@
You will hear a beep when the channel has been stored in the preset location.
Adding a new PRESET
@
Presets can be overwritten at any time using the same procedure as adding a new Preset.
Changing an existing PRESET
@
Presets can not be erased, but they can be overwritten at any time by following the procedure for Adding a new
Preset.
Erasing PRESETS
Antenna not connected or inoperable
-ANTENNA-
Satellite Radio controls
11
SAT Radio Emulation