Valet V100 Installation & Operation Manual - page 11
Manual is about: Premium Cyclonic Central Vacuum Systems
of
16
standard Hose operation
tO start - insert the hose into one of your
inlet valves.
tO stOp - remove the hose and hold the
flap open for a couple a seconds until the
motor stops.
align the locating
tab on the hose cuff
between the guides
on the inlet valve.
tO start - insert the hose into one of your
inlet valves. align the locating tab on the
hose cuff with the two guides on the inlet
valve.
if the hose is inserted correctly the power
unit will not start until you turn it on using
the switch on the hose handle.
tO stOp - turn off using the switch on the
hose handle then unplug the hose from the
inlet valve.
switch Hose operation
ON/Off
Start vacuuming
11