Valet V100 Installation & Operation Manual - page 7

Installing the power unit

positioning

the power unit should be installed in service 

rooms such as a store-room or garage and 

protected against weather, humidity and sudden 

changes of temperature. 

the power unit is not designed for outdoor use 

unless suitably protected.

the installation place shall be sufficiently spacious 

and well lit to allow for a easy access to the 

vacuum unit.

when installed indoors or in a semi-enclosed area 

ensure the space is properly ventilated.

the power unit must be fixed to the wall at a 

height that allows for an easy dismantling of the 

dust container and the replacement of the filter 

cartridge.

If using a Wall Bracket

1a

. mount the bracket on the wall.

If mounting direct to the Wall

1B

. drill. using a spirit level check that the 

bracket is level

2

. release the locking lever.