Valor NVG-720W Owner's Manual - page 24
Sat Radio Operation
Accessing Sat Radio Mode
To switch to Sat Radio mode, press the SRC button on the front panel or the (SRC)
button on the remote control until SAT appears at the top of the screen. The touch keys for
Sat Radio playback are described below.
NOTE: An optional Terk XM Direct Universal Tuner box(XMD1000) and XM Antenna is required
to receive XM Radio, along with a subscription to XM Radio. Check with your dealer for these
Optional devices.
1.Current source indicator, touch this area to access MAIN menu.
2.The artist information of the channel the playing back currently.
3.The preset channel Currently playing back.
4.Bluetooth indicator
5.Current time indicator.
6.Current Band and channel number indicator.
7.Current channel name indicator.
8.Current channel category indicator.
9.Playback information.
10.The volume indicator.
11.
: Touch to change among the following bands: SAT, SAT-1, SAT-2 and SAT-3.
12.
: Touch to open the category folder list.
13.
: Touch to scan the previous available channel of all categories.
14.
: Touch to scan the next available channel of all categories.
15.
: Touch to scan the previous available channel of current category.
16.
: Touch to scan the next available channel of current category.
17.
: Touch to activate/deactivate Scan Mode.
18.
: Touch to display the numeric keypad on the screen to access a channel directly.
Auto Scan
Touch the button to automatically scan the available channels of all categories.
1
2
6
7
15
3
4
5
13
14
12
8
9
10
11
16
17
18
Manual Scan
Touch the / to scan the previous/next available channel of all categories.
Touch the / to scan the previous/next available channel of current category.
Storing a Channe
l
1. Select a band (if needed), then select a channel.
2. Touch and hold an on-screen preset channel for three seconds. The storing process is
complete.
Recalling a channel
12 numbered preset channels store and recall channels for each band. Front 6 stored channels
(1-6) for the current band appear on the screen, touch the channel directly or use the numeric
buttons on the remote control.
You can touch the arrow buttons ( ) on the screen to select other channels.
42
43