P a 5 6 0 instruction manual.
Vm pa560 multi channel power amplifier 1 vm instruction manual thank you for having bought this van medevoort product. We wish you many happy listening hours. The manufacturer accepts no responsibility for any misunderstanding and/or misinterpretation or the consequences arising there from due to th...
Vm pa560 multi channel power amplifier 2 before getting started in general when using your van medevoort product make sure that the following is observed: - the cooling air vents are not covered - the air can move freely around the product - the product is sited on a vibration-free surface - the pro...
Vm pa560 multi channel power amplifier 3 controls precautions connections maintenance and advice technical specifications Î 1 1. On / off power switch. Led indication control. Fully red when switched on, 50% red when in standby mode. In case of malfunction the power led will flicker. Turn the amplif...
Vm pa560 multi channel power amplifier 4 controls precautions connections maintenance and advice technical specifications • only connect the amplifier to a (professionally installed) wall socket with earth or ground and the corresponding voltage setting, as indicated on the back of the amplifier. An...
Vm pa560 multi channel power amplifier 5 controls precautions connections maintenance and advice technical specifications Î 2 3 4 5 6 7 8 9 10 11 12 13 any faulty connection will invalidate the warranty 2. Rightrear ls. The loudspeaker terminal for the right rear channel. Upper one is red (+), botto...
Vm pa560 multi channel power amplifier 6 10. Leftrear ls. The loudspeaker terminal for the left rear channel. Upper one is red (+), bottom one is black (-). 11. Leftrear input. Two inputs: upper one is the a-symmetrical one with a rca-cinch chassis connector. The bottom one features a xlr connector....
Vm pa560 multi channel power amplifier 7 controls precautions connections maintenance and advice technical specifications • for your convenience you will find a red sticker, indicating “phase”. The phase of your electricity system can be determined with a voltage seeker. • the amplifier must only be...
Vm pa560 multi channel power amplifier 8 controls precautions connections maintenance and advice technical specifications power amplifier power > 5 x 150 w power rms > 5 x 110 w distorsion 0,002 % 1 hz - 100 khz power bandwidth 1 hz - 100 khz damping factor 1200 - 1500 input level 1,5 v eff. / 150 w...
