Van Medevoort PA560 Instruction Manual - page 7
vM PA560 MULTI CHANNEL POWER AMPLIFIER
6
10. LeftRear LS. The loudspeaker terminal for the Left Rear channel.
Upper one is Red (+), bottom one is Black (-).
11. LeftRear Input. Two inputs: upper one is the a-symmetrical one with a RCA-cinch chassis
connector. The bottom one features a XLR connector. A switch is provided inside the
amplifier, to select the input desired. Standard the RCA-phono input is connected.
This switch can only be accessed by an authorized Van Medevoort Service Center.
12. DC control. DC control can only be used with other Van Medevoort amplifier(s). One can
only switch into STANDBY or ON, via the Van Medevoort Remote Control.
13.
IEC-USA Power Chassis Connector. To be connected with the proper wall socket, which
must be earthed or grounded. Every Van Medevoortproduct is optimized for your country’s
electrical standards. e.g. 230V-50Hz or 115V-60Hz. This cannot be changed. Please check
that your product is set to the correct voltage setting BEFORE connecting to an AC power
outlet. Any faulty connection will invalidate the warranty.