VAPamore MR-500 Vento Instruction Book And Users Manual - page 11
PROBLEM?
IMPORTANT :
TROUBLESHOOTING
GO TO VAPAMORE.COM TO SEE THE MR-500 VENTO INSTRUCTIONAL VIDEO
What do I do if the machine or an accessory becomes damaged or broken?
Visit www.vapamore.com for a complete list of parts and accessories available for
purchase or simply call us at 480-951-8900 or E-mail us at info@vapamore.com to
purchase replacement parts or schedule a repair. WE ARE HERE TO HELP...
TROUBLESHOOTING
One of the ETL protection devices has been triggered or the power cord has been
Call us at 480-951-8900 or E-mail us at info@vapamore.com to schedule a repair.
Do not return to the place of purchase for warranty or repairs. Only
damaged.
Vapamore is authorized to facilitate all repairs to keep the highest quality and ETL
standards. Repairs or tampering by any other party will void the lifetime Warranty.
Vacuum does not turn on.
vacuum
vacuum
The thermal protector has been triggered due to a blockage in the hose, hose handle,
call us at 480-951-8900 or E-mail us at info@vapamore.com for repair
In this case you must unplug the vacuum, remove the blockage and let the vacuum
sit unplugged. Within 30 minutes the thermal protector will cool and reset. If the vacuum
does not restart,
Vacuum has little to no suction.
See sections titled, BLOCKAGE, FILTER BAG, VACUUM MOTOR FILTER.
drive belt is damaged or worn.
Make sure the hose is plugged into the socket and the handle properly. Allow the
vacuum to cool per the “thermal protector section”. Make sure the foot switch in the on
setting. Contact Vapamore for help replacing the drive belt at 480-951-8900 or E-mail
info@vapamore.com.
QUESTIONS? WE ARE HERE TO HELP.
CONTACT US FOR HELP AT 480-951-8900 OR E-MAIL US AT INFO@VAPAMORE.COM