VAPamore MR-500 Vento Instruction Book And Users Manual - page 6
ASSEMBLING THE MR-500 VENTO
Fig.1
GO TO VAPAMORE.COM TO SEE THE MR-500 VENTO INSTRUCTIONAL VIDEO
Fig.2
1
Fig.3
Push down
to lock in
place
VACUUM HOSE AND HANDLE
With the hose pointed towards the rear of the vacuum, push
its locked into place. To remove the connector push in the
release buttons located on both sides of the connector and
pull up to release. NOTE: The hose contains electrical wires
and should not be used if damaged or if wires are exposed in
any way through the outer shielding. Fig.1
switch operated electric rotating brush to be used for carpets and rugs plus a non electric
the non electric extension pole or directly with the hose handle.
MIN
MAX
Release
buttons
on sides
ELECTRIC EXTENSION POLE AND FLOOR HEAD
Attached the hose handle into the electric extension pole by
locked into place. To remove the handle push in the release
button and pull upward. To extend or collapse the extension
pole, push downward or pull upward as directed by the
arrows on the extension handle. Fig. 2
pull up on the electric extension pole to release. Fig. 3
NON ELECTRIC EXTENSION POLE, FLOOR HEAD AND TOOLS
Attached the hose handle into the non electric extension pole
Fig.4
used with the non electric extension pole or directly to the
hose handle.
tools are attached in the same manner by pushing the non
of the vacuum to rotate the internal brush. Fig. 5
Push all
tools down
to lock in
place
Hose handle
Non electric
pole
Push down
to lock in
place
Release
petal
to extend and collapse the extension pole . Fig. 4
Release
button
Push down
to lock in
place
Push up
or down
to extend
or collapse
push button
to extend or
collapse pole
Push down
until snug
Fig.5
e
e
e
e
e
e