Varimixer GL 30F/N Instruction Manual - page 4
15
Parte 8
Lubrifi cazione guide
Questa operazione va eseguita
dopo la pulizia dell’affettatrice
oppure ogni qualvolta si riscontrino
diffi coltà di scorrimento.
Utilizzare olio tipo SHELL ONDINA
15 oppure ESSO MARCOL 82.
Oliatura barra guida del piatto
scorrevole:
1 Lasciare cadere alcune goccie
di
lubrifi cante sulla barra
2 Far scorrere il dispositivo ultima
fetta sulla barra guida
Oliatura barra guida del carrello
piatto portamerce:
1 Portare il piatto portamerce a
fi ne corsa.
2 Sollevare l’affettatrice.
3 Lasciare cadere alcune goccie
di
lubrifi cante sulla barra
carrello.
4 Apoggiare l’affettatrice sul piano
di lavoro, far scorrere per alcune
volte il piatto porta merce sino
a fi ne corsa e ritornare verso
l’operatore.
Part 8
Guides lubrication
This operation must be performed
after cleaning the slicer or
whenever the sliding is diffi cult.
Use oil SHELL ONDINA 15 or
ESSO MARCOL 82.
Lubrication of the guide bar of
the product holder:
1 Drop some oil on the bar
2 Let the last slice device slide on
the guide bar
Lubrication of the guide
bar of the product holder
carriage:
1 Push the product holder towards
stroke
end
2 Lift the slicer
3 Drop some oil on the bar
4 Place the slicer on the work
top, push the product holder
to and from.