Varytec LED Accu Penta User Manual - page 16
16 / 24
Press the button; fixture off, ready mode
Press the button, auto run mode, and pre SPEED
could adjust the auto run speed
Press the button, sound activated
Press the button, strobe mode, and press SPEED
could adjust the strobe speed
Press the button, built in program mode, could
adjust built in program pattern
Press the button, DMX control mode
Press the button, adjust auto run speed and
strobe speed
Press the button, slave mode
Press the button, set DMX address code,
press”+” and “‐“ to adjust, press ENTER to store;
then press ”D”, DMX receiving mode, could
receive DMX signal
Press the button, could change DMX address and
manual dimming value
Press the button, start LCD backlight, auto off 20
seconds later
Press the button, could change DMX address and
manual dimming value
Press the button and “+” “‐“, could adjust red
intensity(1‐6 color effect could mixing, user
defined)
Press the button and “+” “‐“, could adjust green
intensity(1‐6 color effect could mixing, user
defined)
Press the button and “+” “‐“, could adjust blue
intensity(1‐6 color effect could mixing, user