Varytec LED Accu Penta User Manual - page 5
5 / 24
2. Introduction
2.1. Statement
Thank you for purchasing the LED Accu Penta. Please read these instructions carefully before begin
and operate the fixtures according to these instructions to avoid any possible damages and accidents
causes by misusage.
2.2. Product description
This product has a light body and fashion design. It uses high power 6-in-1 LED, which means
each LED is made of R, G, B, A, W,V LED chips. Long life span, low power consumption, good
color mixing effect and high brightness are the most prominent features. Each kind of LED can be
independently dimmed. The built-in program includes dimming, strobe, gradual change, fading and so
on. It uses lithium battery power supply, stable capability and easy to carry. International standard
DMX 512 signal is requested.
2.3. Features
High quality LED: low consumption, high brightness, stable capability and long life
Each color of LED with 32-bit, 16666 grades dimming. 600Hz dimming frequency, take
pictures without flicker
DMX512
Controller,4 button set DMX ID address with LCD display
Dim 0%-100%, Strobe、gradual change、jumping change and etc
DMX512
Controller,2 layers LEDs, under layer: 3 pcs. LEDs, upper layer: 6 pcs. LEDs, could
be controlled alone between layers
Auto run/master slave/interconnected multi-machine control
Optional: Wireless DMX control
Electric quantity display
Lithium battery power supply, stable capability and easy to carry
IR remote control function
Power charging indicator
Output
mode
optional
Lens
degree:
25º、45º optional
Output
Mode:H (100%), M (75%), S (50%)
DMX Controller channel optional
IP20