Vaterra TWIN HAMMERS KIT Owner's Manual - page 17
EN
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
declaration of conforMity
(in accordance with ISO/IEC 17050-1)
No. HH2012101102
Product(s):
VTR Twin Hammers 1.9 Rock Racer RTR 1/10th Scale
Item Number(s): VTR03000I
Equipment class: 2
The object of declaration described above is in conformity with the requirements
of the specifications listed below, following the provisions of the European R&TTE
directive 1999/5/EC, EMC Directive 2004/108/EC and LVD Directive 2006/95/EC:
EN 300-328 V1.7.1: 2006
EN 301 489-1 V1.7.1: 2006
EN 301 489-17 V1.3.2: 2008
EN 60950-1:2006+A12: 2011
EN55022: 2010
EN55024: 2010
EN61000-3-2:2006+A1:2009+A2:2009
EN61000-3-3:2008
Signed for and on behalf of:
Horizon Hobby, Inc.
Champaign, IL USA
October 11, 2012
ComplianCe information for the european union
/ / / / / /
Steven A. Hall
Executive Vice President and Chief Operating Officer
International Operations and Risk Management
Horizon Hobby, Inc.
inStructionS for diSPoSal of
Weee By uSerS in the euroPean union
This product must not be disposed of with other waste. Instead, it is the user’s
responsibility to dispose of their waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where you
can drop off your waste equipment for recycling, please contact your local city office,
your household waste disposal service or where you purchased the product.
fCC statement
/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
antenna SeParation diStance
When operating your Spektrum
transmitter, please be sure to maintain
a separation distance of at least 5 cm
between your body (excluding fingers,
hands, wrists, ankles and feet) and the
antenna to meet RF exposure safety
requirements as determined by
FCC regulations.
The following illustrations show the
approximate 5 cm RF exposure area
and typical hand placement when
operating your Spektrum transmitter.
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference
that may cause undesired operation.
Caution: Changes or modifi-
cations not expressly approved by
the party responsible for compliance
could void the user’s authority to
operate the equipment.
This product contains a radio
transmitter with wireless technology
which has been tested and found to
be compliant with the applicable
regulations governing a radio
transmitter in the 2.400GHz to
2.4835GHz frequency range.
non-Warranty rePairS
should your service not be covered by
warranty, service will be completed
and payment will be required with-
out notification or estimate of the
expense unless the expense exceeds
50% of the retail purchase cost. By
submitting the item for service you are
agreeing to payment of the service with-
out notification. Service estimates are
available upon request. You must include
this request with your item submitted for
service. Non-warranty service estimates
will be billed a minimum of 1/2 hour of
labor. In addition you will be billed for
return freight. Horizon accepts money
orders and cashier’s checks, as well as
Visa, MasterCard, American Express, and
Discover cards. By submitting any item
to Horizon for service, you are agreeing
to Horizon’s Terms and Conditions found
on our website http://www.horizonhobby.
com/content/_service-center_render-
service-center.
notiCe: horizon service is lim-
ited to product compliant in the
country of use and ownership. if
non-compliant product is received
by horizon for service, it will be
returned unserviced at the sole
expense of the purchaser.