- DL manuals
- Vauxhall
- Automobile
- Meriva
- Owner's Manual
Vauxhall Meriva Owner's Manual
Summary of Meriva
Page 1
0 - 1 owner’s manual model year 2013.5 edition: january 2013 ts 1688-b-13 vauxhall meriva owner’s manual model year 2013.5 edition: january 2013 ts 1688-b-13.
Page 2
Introduction .................................... 2 in brief ............................................ 6 keys, doors and windows ............ 19 seats, restraints ........................... 34 storage ........................................ 58 instruments and controls ............. 78 lighting ...
Page 3
2 introduction introduction.
Page 4
Introduction 3 vehicle specific data please enter your vehicle's data on the previous page to keep it easily accessible. This information is available in the sections "service and maintenance" and "technical data" as well as on the identification plate. Introduction your vehicle is a designed combin...
Page 5
4 introduction danger, warnings and cautions 9 danger text marked 9 danger provides information on risk of fatal injury. Disregarding this information may endanger life. 9 warning text marked 9 warning provides information on risk of accident or injury. Disregarding this information may lead to inju...
Page 6
Introduction 5.
Page 7
6 in brief in brief initial drive information vehicle unlocking press button c to unlock the doors and load compartment. Open the doors by pulling the handles. To open the tailgate, push the touchpad switch under the tailgate moulding. Radio remote control 3 20, central locking system 3 21, load com...
Page 8
In brief 7 seat backrests pull lever, adjust inclination and release lever. Allow the seat to engage audibly. Seat position 3 36, seat adjustment 3 36. Seat height lever pumping motion up = seat higher down = seat lower seat position 3 36, seat adjustment 3 36. Seat inclination lever pumping motion ...
Page 9
8 in brief head restraint adjustment press release button, adjust height and engage. To adjust horizontally, pull the head restraint forwards. It engages in several positions. To return to its rearmost position, pull fully forwards and release. Head restraints 3 34. Seat belt pull out the seat belt ...
Page 10
In brief 9 exterior mirrors select the relevant exterior mirror and adjust it. Convex exterior mirrors 3 28, electric adjustment 3 28, folding exterior mirrors 3 29, heated exterior mirrors 3 29. Steering wheel adjustment unlock the lever, adjust the steering wheel, then engage the lever and ensure ...
Page 11
10 in brief instrument panel overview.
Page 12
In brief 11 1 power windows ..................... 30 2 exterior mirrors ..................... 28 3 cruise control ..................... 142 4 side air vents ...................... 125 5 turn and lane-change signals, headlight flash, low beam and high beam ... 114 exit lighting .........................
Page 13
12 in brief exterior lighting turn light switch auto = automatic light control: exterior lighting is switched on and off automatically m = activation or deactivation of the automatic light control 8 = sidelights 9 = low beam vehicles without automatic light control: 7 = off press light switch > = fr...
Page 14
In brief 13 turn and lane-change signals lever up = right turn signal lever down = left turn signal turn and lane-change signals 3 114, parking lights 3 115. Hazard warning flashers operated with the ¨ button. Hazard warning flashers 3 113. Horn press j..
Page 15
14 in brief washer and wiper systems windscreen wiper 2 = fast 1 = slow p = interval wiping or automatic wiping with rain sensor § = off for a single wipe when the windscreen wiper is off, press the lever down. Windscreen wiper 3 80, wiper blade replacement 3 166. Windscreen washer system pull lever...
Page 16
In brief 15 push lever. Washer fluid is sprayed on the rear window and the wiper wipes a few times. Rear window wiper/washer 3 81. Climate control heated rear window, heated exterior mirrors the heating is operated by pressing the Ü button. Heated rear window 3 32. Demisting and defrosting the windo...
Page 17
16 in brief transmission manual transmission reverse: with the vehicle stationary, wait 3 seconds after depressing clutch pedal then press the release button on the selector lever and engage the gear. If the gear does not engage, set the lever to neutral, release the clutch pedal and depress again; ...
Page 18
In brief 17 starting the engine ■ turn key to position 1 ■ move the steering wheel slightly to release the steering wheel lock ■ operate clutch and brake ■ automatic transmission in p or n ■ do not operate accelerator pedal ■ diesel engines: turn the key to position 2 for preheating and wait until c...
Page 19
18 in brief ■ lock the vehicle with button e on the radio remote control. ■ activate the anti-theft alarm system 3 27. ■ do not park the vehicle on an easily ignitable surface. The high temperature of the exhaust system could ignite the surface. ■ close the windows. ■ the engine cooling fans may run...
Page 20
Keys, doors and windows 19 keys, doors and windows keys, locks ................................... 19 doors ........................................... 25 vehicle security ............................ 26 exterior mirrors ............................ 28 interior mirrors ............................. ...
Page 21
20 keys, doors and windows radio remote control used to operate: ■ central locking system ■ anti-theft locking system ■ anti-theft alarm system ■ power windows the radio remote control has a range of approx. 5 metres. It can be restricted by external influences. The hazard warning flashers confirm o...
Page 22
Keys, doors and windows 21 extend the key and open the unit. Replace the battery (battery type cr 2032), paying attention to the installation position. Close the unit and synchronise. Key with fixed key section have the battery replaced by a workshop. Radio remote control synchronisation after repla...
Page 23
22 keys, doors and windows the setting can be changed in the menu settings in the info-display. Vehicle personalisation 3 106. The setting can be saved for the key being used. Memorised settings 3 21. Locking close doors, load compartment and fuel filler flap. Press button e. If the driver's door is...
Page 24
Keys, doors and windows 23 fault in radio remote control system unlocking manually unlock the driver's door by turning the key in the lock. Switch on the ignition and press the central locking button to unlock all doors, load compartment and fuel filler flap. By switching on the ignition, the anti- ...
Page 25
24 keys, doors and windows automatic locking automatic locking after driving off the vehicle is locked automatically when exceeding a speed of 2 mph. Opening from outside is not possible. Additionally, opening of the rear doors from inside is not possible when the vehicle speed is above 2 mph. Green...
Page 26
Keys, doors and windows 25 9 warning use the child locks whenever children are occupying the rear seats. Using a key or suitable screwdriver, turn the child lock in the rear door to the horizontal position. The green led will extinguish. The door cannot be opened from the inside. For deactivation, t...
Page 27
26 keys, doors and windows closing use one of the interior handles. Do not push the touchpad switch under the moulding whilst closing as this will unlock the tailgate again. Central locking system 3 21. General hints for operating tailgate 9 warning do not drive with the tailgate open or ajar, e.G. ...
Page 28
Keys, doors and windows 27 activating press e on the radio remote control twice within 10 seconds. Anti-theft alarm system the anti-theft alarm system is operated in conjunction with the central locking system. It monitors: ■ doors, tailgate, bonnet ■ ignition unlocking the vehicle deactivates the a...
Page 29
28 keys, doors and windows ignition on then off, then disconnect the vehicle's battery within 15 seconds. Immobiliser the system is part of the ignition switch and checks whether the vehicle is allowed to be started with the key being used. The immobiliser is activated automatically after the key ha...
Page 30
Keys, doors and windows 29 in position 0 no mirror is selected. Folding for pedestrian safety, the exterior mirrors will swing out of their normal mounting position if they are struck with sufficient force. Reposition the mirror by applying slight pressure to the mirror housing. Heated mirrors opera...
Page 31
30 keys, doors and windows automatic anti-dazzle dazzle from following vehicles at night is automatically reduced. Windows windscreen heat-reflecting windscreen the heat-reflecting windscreen has a coating which reflects solar radiation. Also data signals, e.G. From toll stations, might be reflected...
Page 32
Keys, doors and windows 31 keep a close watch on the windows when closing them. Ensure that nothing becomes trapped in them as they move. Power windows can be operated: ■ with ignition on ■ within 10 minutes of switching ignition off ■ within 5 minutes of opening or closing a door after switching of...
Page 33
32 keys, doors and windows press and hold c button to open windows. Press and hold e button to close windows. Release button to stop window movement. Overload if the windows are repeatedly operated within short intervals, the window operation is disabled for some time. Initialising the power windows...
Page 34
Keys, doors and windows 33 if the sun visors have integral mirrors, the mirror covers should be closed when driving. A ticket holder is located on the back of the sun visor. Roof moonroof do not affix any stickers to the roof. Do not cover the vehicle using a tarpaulin. Sunblind the sunblind is elec...
Page 35
34 seats, restraints seats, restraints head restraints ............................ 34 front seats ................................... 36 rear seats ................................... 41 seat belts ..................................... 44 airbag system .............................. 48 child restra...
Page 36
Seats, restraints 35 horizontal adjustment to adjust horizontally, pull the head restraint forwards. It engages in several positions. To return to its rearmost position, pull fully forwards and release. Head restraints on rear seats height adjustment pull the head restraint upwards or press both cat...
Page 37
36 seats, restraints front seats seat position 9 warning only drive with the seat correctly adjusted. ■ sit with buttocks as far back against the backrest as possible. Adjust the distance between the seat and the pedals so that legs are slightly angled when pressing the pedals. Slide the front passe...
Page 38
Seats, restraints 37 seat positioning pull handle, slide seat, release handle. Seat backrests pull lever, adjust inclination and release lever. Allow the backrest to engage audibly. Seat height lever pumping motion up = seat higher down = seat lower.
Page 39
38 seats, restraints seat inclination lever pumping motion up = front end higher down = front end lower lumbar support adjust lumbar support using the four- way switch to suit personal requirements. Moving support up and down: push switch up or down. Increasing and decreasing support: push switch fo...
Page 40
Seats, restraints 39 armrest detachable armrest the armrest contains a storage compartment. Storage compartment 3 60. Installing armrest on the centre console press the rear button and insert the rear guide pins into the upper guide rails. Release the button. Lower the armrest at the front. Pull the...
Page 41
40 seats, restraints moving armrest pull the front handle slightly and move the armrest to the desired position. Release the handle. Move the armrest until it engages audibly. If a cupholder is installed in the lower guide rail, make sure that the frame of the cupholder is in the initial position. N...
Page 42
Seats, restraints 41 rear seats seat adjustment 9 warning only drive with the outer seats engaged in the guide rails. 9 warning never adjust seats while driving as they could move uncontrollably. The rear outboard seats can be individually moved forwards or backwards. The seats are movable in longit...
Page 43
42 seats, restraints pull handle and slide the seat transversely backward into position 1. The seat is automatically guided inward. Release handle and allow seat to engage in position. Moving seats to position 2 pull handle and slide the seat transversely forwards into position 2. The seat is automa...
Page 44
Seats, restraints 43 insert the hooks of the adapter into the recesses of the seatback and push the adapter forwards. Lock the adapter by turning the ignition key clockwise in the lock. The adapter is locked properly when the green mark is visible. Mount the armrest on the adapter. Armrest 3 39. Att...
Page 45
44 seats, restraints removing the adapter unlock the adapter by turning the ignition key anticlockwise in the lock. The adapter is unlocked when the red mark is visible. Push the adapter rearward and remove. Seat belts the seat belts are locked during heavy acceleration or deceleration of the vehicl...
Page 46
Seats, restraints 45 9 warning incorrect handling (e.G. Removal or fitting of belts) can trigger the belt pretensioners. Deployment of the belt pretensioners is indicated by continuous illumination of control indicator v 3 90. Triggered belt pretensioners must be replaced by a workshop. Belt pretens...
Page 47
46 seats, restraints height adjustment 1. Pull belt out slightly. 2. Press button. 3. Adjust height and engage. Adjust the height so that the belt lies across the shoulder. It must not lie across the throat or upper arm. Do not adjust while driving. Removing seat belt to release belt, press red butt...
Page 48
Seats, restraints 47 click bottom latch plate into right- hand buckle (1) at centre seat. Remove top latch plate from retainer, guide over shoulder and lap area with belt (do not twist) and click into left- hand buckle (2) at centre seat. To remove the seat belt, first press the button on the left-h...
Page 49
48 seats, restraints airbag system the airbag system consists of a number of individual systems depending on the scope of equipment. When triggered the airbags inflate within milliseconds. They also deflate so quickly that it is often unnoticeable during the collision. 9 warning if handled improperl...
Page 50
Seats, restraints 49 the inflated airbags cushion the impact, thereby reducing the risk of injury to the upper body and head of the front seat occupants considerably. 9 warning optimum protection is only provided when the seat is in the proper position 3 36. Keep the area in which the airbag inflate...
Page 51
50 seats, restraints curtain airbag system the curtain airbag system consists of an airbag in the roof frame on each side. This can be identified by the word airbag on the roof pillars. The curtain airbag system is triggered in the event of a side-on impact of a certain severity. The ignition must b...
Page 52
Seats, restraints 51 use the ignition key to choose the position: * = front passenger airbag is deactivated and will not inflate in the event of a collision. Control indicator * illuminates continuously in the centre console. A child restraint system can be installed in accordance with the chart chi...
Page 53
52 seats, restraints child restraints child restraint systems we recommend the vauxhall child restraint system which is tailored specifically to the vehicle. When using the vauxhall child restraint system, move the rear outboard seats into position 2 3 41. We recommend fastening the vauxhall child r...
Page 54
Seats, restraints 53 selecting the right system the rear seats are the most convenient location to fasten a child restraint system. Children should travel facing rearwards in the vehicle as long as possible. This makes sure that the child's backbone, which is still very weak, is under less strain in...
Page 55
54 seats, restraints child restraint installation locations permissible options for fitting a child restraint system weight and age class on front passenger seat on rear outboard seats on rear centre seat activated airbag deactivated airbag group 0: up to 10 kg or approx. 10 months x u 1 u 2 , 4 u 3...
Page 56
Seats, restraints 55 1 = only if front passenger seat airbag system is deactivated. If the child restraint system is being secured using a three- point seat belt, move seat height adjustment to uppermost position and ensure that vehicle seat belt runs forwards from the upper anchorage point. Adjust ...
Page 57
56 seats, restraints il = suitable for particular isofix restraint systems of the 'specific-vehicle', 'restricted' or 'semi-universal' categories. The isofix restraint system must be approved for the specific vehicle type. Iuf = suitable for isofix forward-facing child restraint systems of universal...
Page 58
Seats, restraints 57 isofix child restraint systems fasten vehicle-approved isofix child restraint systems to the isofix mounting brackets. Specific vehicle isofix child restraint system positions are marked in the table by il. Isofix mounting brackets are indicated by a label on the backrest. Top-t...
Page 59
58 storage storage storage compartments ................ 58 load compartment ....................... 70 roof rack system ......................... 76 loading information ..................... 76 storage compartments 9 warning do not store heavy or sharp objects in the storage compartments. Otherwise...
Page 60
Storage 59 detachable cupholder a cupholder can be attached either to the upper or lower guide rails in the front console. Fold the frame out of initial position before using. Note if the cupholder is installed in the lower guide rail and the detachable armrest in the upper guide rail, make sure tha...
Page 61
60 storage cupholder on armrest adapter a further cupholder is integrated to the armrest adapter of the rear centre seat. Armrest adapter 3 42. Front storage a storage compartment is located next to the steering wheel. Underseat storage lift drawer at recessed edge and pull out. Maximum load: 3 kg. ...
Page 62
Storage 61 rear carrier system the rear carrier system (flex-fix system) allows bicycles to be attached to a pull-out carrier integrated into the vehicle floor. The transportation of other objects is not permitted. The maximum load of the rear carrier system is 40 kg. The maximum load per bicycle is...
Page 63
62 storage will not engage correctly, do not fit objects to the system and slide the system back. Seek the assistance of a workshop. Install the tail lamps first remove the rear tail lamp (1), then the front (2) tail lamp from the recesses. Open out the lamp support on the back of the tail lamp comp...
Page 64
Storage 63 lock the rear carrier system swivel the right clamping lever (1) first, followed by the left clamping lever (2), until a resistance is noticeable. The rear carrier system is locked when the clamping levers are swivelled by approx. 50°. Otherwise safe functionality is not guaranteed. Note ...
Page 65
64 storage unfold pedal crank recesses fold one or both pedal crank recesses upwards until the diagonal support engages. Remove the pedal crank mounts from the pedal crank recesses. Adapting the rear carrier system to a bicycle press the release lever and withdraw the wheel recesses..
Page 66
Storage 65 push the release lever on the strap retainer and remove the strap retainer. Prepare the bicycle for attachment note the maximum width for the pedal crank is 38.3 mm and the maximum depth is 14.4 mm. Rotate the left pedal (without a chain cog) vertically downwards. The pedal on the left pe...
Page 67
66 storage if the bicycle has curved pedal cranks, screw in the pedal crank unit all the way (position 1). Put on the bicycle. The pedal crank here must be placed in the pedal crank recess opening as shown in the illustration. Caution make sure that the pedal does not touch the surface of the rear e...
Page 68
Storage 67 place the wheel recesses so that the bicycle is roughly horizontal. Here, the distance between the pedals and the tailgate should be at least 5 cm. Both bicycle tyres must be in the wheel recesses. Align the bicycle in the longitudinal direction of the vehicle: slightly loosen the pedal m...
Page 69
68 storage removing a bicycle from the rear carrier system undo strap retainers on both bicycle tyres. Hold on to the bicycle, loosen the attachment screw for the pedal bearing mount, then lift the pedal bearing mount to remove it. Retracting the rear carrier system push the pedal crank mounts into ...
Page 70
Storage 69 press release lever and slide in wheel recesses all the way as far as they will go. Disengage the locking lever on the diagonal support and fold both pedal crank recesses down. 9 warning risk of pinching. Remove number plate and fold down the number plate holder. Swivel first the left cla...
Page 71
70 storage push the release lever up and hold. Lift the system slightly and push it into the bumper until it engages. Release lever must return to original position. 9 warning if the system cannot be correctly engaged, please seek the assistance of a workshop. Load compartment folding down rear seat...
Page 72
Storage 71 pull the handle on the front side of the backrest and fold down the backrest onto the seat cushion. The seat is lowered automatically. The backrests can also be folded from the load compartment. Pull the handle on the back side of the backrest and fold down the backrest. To fold up, pull ...
Page 73
72 storage removing the cover unhook retaining straps from tailgate. Lift cover at the rear and push it upwards at the front. Remove the cover. Stowing the cover unhook retaining straps from tailgate. Lift cover at the rear and push it upwards out of the side guides at the front. Stow the cover behi...
Page 74
Storage 73 double load-bay floor the double load-bay floor can be inserted in the load compartment in two positions: ■ directly above the cover for the spare wheel well or the rear floor cover, ■ in the upper openings in the load compartment. To remove, lift the load-bay floor using the recess and p...
Page 75
74 storage installation there are two installation openings in the roof frame: suspend rod of net at one side, push to the front and engage. Extend rod, suspend at other side, push to the front and engage. Suspend hooks of net tensioning belts in lashing eyes in the floor behind the front seats. Ten...
Page 76
Storage 75 roll the upper net rod down to approximately over the middle. Place the upper net rod over the tensioning straps next to the lower net rod. The hooks on the upper net rod must point away from the lower net rod. Fasten velcro tape tightly about the net next to the length adjusters. The len...
Page 77
76 storage depending on the vehicle, a box is located under the driver's seat. Pull handle and fold down the cover. Maximum load: 1.5 kg. Roof rack system roof rack for safety reasons and to avoid damage to the roof, the vehicle approved roof rack system is recommended. For further information conta...
Page 78
Storage 77 ■ use the hook at the left sidewall of the load compartment for hanging up carrier bags. Pull out the hook. Maximum load: 3 kg. ■ secure loose objects in the load compartment to prevent them from sliding. ■ when transporting objects in the load compartment, the backrests of the rear seats...
Page 79
78 instruments and controls instruments and controls controls ....................................... 78 warning lights, gauges and indicators ..................................... 85 information displays ..................... 96 vehicle messages ...................... 100 trip computer ...............
Page 80
Instruments and controls 79 heated steering wheel activate heating by pressing * button. Activation is indicated by the led in the button. The recommended grip areas of the steering wheel are heated quicker and to a higher temperature than the other areas. Heating is operational when the engine is r...
Page 81
80 instruments and controls windscreen wiper/washer windscreen wiper 2 = fast 1 = slow p = interval wiping § = off for a single wipe when the windscreen wiper is off, press the lever down. Do not use if the windscreen is frozen. Switch off in car washes. Adjustable wiper interval wiper lever in posi...
Page 82
Instruments and controls 81 adjustable sensitivity of the rain sensor turn the adjuster wheel to adjust the sensitivity: low sensitivity = turn adjuster wheel downwards high sensitivity = turn adjuster wheel upwards keep the sensor free from dust, dirt and ice. Windscreen washer pull lever. Washer f...
Page 83
82 instruments and controls push lever. Washer fluid is sprayed onto the rear window and the wiper wipes a few times. Do not use if the windscreen is frozen. Switch off in car washes. The rear window wiper comes on automatically when the windscreen wiper is switched on and reverse gear is engaged. A...
Page 84
Instruments and controls 83 set date and time press the config button. The menu settings is displayed. Select time & date. Selectable setting options: ■ set time: changes the time shown on the display. ■ set date: changes the date shown on the display. ■ set time format: changes indication of hours ...
Page 85
84 instruments and controls a further 12 volt power outlet is located in the rear console. Do not exceed the maximum power consumption of 120 watts. With ignition off, the power outlets are deactivated. Additionally the power outlets are deactivated in the event of low battery voltage. Electrical ac...
Page 86
Instruments and controls 85 warning lights, gauges and indicators instrument cluster in some versions, the needles of the instruments briefly rotate to the end position when the ignition is switched on. Speedometer indicates vehicle speed. Odometer the bottom line displays the recorded distance in m...
Page 87
86 instruments and controls fuel gauge displays the fuel level or gas level in the tank depending on the operation mode. Control indicator i illuminates if the level in the tank is low. Refuel immediately if it flashes. During liquid gas operation, the system automatically switches over to petrol op...
Page 88
Instruments and controls 87 caution if engine coolant temperature is too high, stop vehicle, switch off engine. Danger to engine. Check coolant level. Service display the engine oil life system lets you know when to change the engine oil and filter. Based on driving conditions, the interval at which...
Page 89
88 instruments and controls depending on the equipment the position of the control indicators may vary. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test. The control indicator colours mean: red = danger, important reminder yellow = warning, in...
Page 90
Instruments and controls 89 control indicators in the instrument cluster.
Page 91
90 instruments and controls control indicators in the centre console turn signal o illuminates or flashes green. Illuminates briefly the parking lights are switched on. Flashes a turn signal or the hazard warning flashers are activated. Rapid flashing: failure of a turn signal light or associated fu...
Page 92
Instruments and controls 91 9 warning have the cause of the fault remedied immediately by a workshop. Belt pretensioners, airbag system 3 44, 3 48. Airbag deactivation v illuminates yellow. Illuminates for approx. 60 seconds after the ignition is switched on. The front passenger airbag is activated....
Page 93
92 instruments and controls brake and clutch system brake and clutch fluid level & illuminates red. The brake and clutch fluid level is too low 3 163. 9 warning stop. Do not continue your journey. Consult a workshop. Operate pedal - illuminates or flashes yellow. Illuminates brake pedal needs to be ...
Page 94
Instruments and controls 93 upshift [ illuminates green or is shown as a symbol in the driver information centre with uplevel-display when upshifting is recommended for fuel saving reasons. Variable effort steering c illuminates yellow. Fault in variable effort steering system. This may lead to a hi...
Page 95
94 instruments and controls continue driving until % extinguishes. If possible do not allow engine speed to drop below 2000 rpm. Illuminates the diesel particle filter is full. Start cleaning process as soon as possible. Flashes the maximum filling level of the filter is reached. Start cleaning proc...
Page 96
Instruments and controls 95 additionally a warning message is displayed on vehicles with midlevel- and uplevel-display. Catalytic converter 3 133. Bleeding the diesel fuel system 3 166. Immobiliser d flashes yellow. Fault in the immobiliser system. The engine cannot be started. Reduced engine power ...
Page 97
96 instruments and controls 9 warning stop your journey immediately! Follow the instructions as described in paragraph "fault in the automatic locking system" before continuing your journey 3 24. Consult a workshop. Information displays driver information centre the driver information centre (dic) i...
Page 98
Instruments and controls 97 selecting menus and functions the menus and functions can be selected via the buttons on the turn signal lever. Press the menu button to switch between the menus or to return from a submenu to the next higher menu level. Turn the adjuster wheel to highlight a menu option ...
Page 99
98 instruments and controls ◆ unit1: great britain ◆ unit2: united states ◆ unit3: europe ■ tire pressure system: 3 184 ■ remaining oil life: 3 87 ■ speed warning: if exceeding the preset speed, a warning chime will be activated ■ language: displayed language can be changed if the vehicle is not equ...
Page 100
Instruments and controls 99 graphic-info-display indicates: ■ time 3 82 ■ outside temperature 3 82 ■ date 3 82 ■ infotainment system, see description for infotainment system in the infotainment system manual ■ settings for vehicle personalisation 3 106 colour-info-display the colour-info-display ind...
Page 101
100 instruments and controls selecting with the infotainment system select a function via the infotainment system buttons. The menu of the selected function is displayed. The multifunction knob is used to select an item and to confirm. Multifunction knob the multifunction knob is the central control...
Page 102
Instruments and controls 101 vehicle messages on the midlevel-display the vehicle messages are displayed as code numbers. No. Vehicle message 2 no radio remote control detected, depress clutch pedal for a restart 3 engine coolant level low 4 air conditioning off 5 steering wheel is locked no. Vehicl...
Page 103
102 instruments and controls no. Vehicle message 55 diesel particle filter is full 3 132 56 tyre pressure imbalance on front axle 57 tyre pressure imbalance on rear axle 58 tyres without tpms sensors detected 59 open and then close driver window 60 open and then close front passenger window 61 open ...
Page 104
Instruments and controls 103 ■ brakes ■ drive systems ■ ride control systems ■ cruise control ■ object detection systems ■ lighting, bulb replacement ■ wiper/washer system ■ doors, windows ■ radio remote control ■ seat belts ■ airbag systems ■ engine and transmission ■ tyre pressure ■ diesel particl...
Page 105
104 instruments and controls the warning message or warning code will disappear after the engine has been started two times running without voltage drop. If the battery cannot be recharged, have the cause of the fault remedied by a workshop. Trip computer the menus and functions can be selected via ...
Page 106
Instruments and controls 105 the information of the two trip computers can be reset separately, making it possible to display different trip distances. To reset, press the set/clr button for a few seconds. On vehicles with reset knob, hold the reset knob depressed for a few seconds with the ignition...
Page 107
106 instruments and controls vehicle personalisation the vehicle's behaviour can be personalised by changing the settings in the info-display. Some of the personal settings for different drivers can be memorised individually for each vehicle key. Memorised settings 3 21. Depending on vehicle equipme...
Page 108
Instruments and controls 107 time date see clock 3 82. Radio settings see description for infotainment system in the infotainment system manual. Phone settings see description for infotainment system in the infotainment system manual. Vehicle settings ■ climate and air quality auto fan speed: modifi...
Page 109
108 instruments and controls personal settings in the colour-info-display press the config button. The menu settings is displayed. The following settings can be selected by turning and pressing the multifunction knob: ■ languages ■ time & date ■ radio settings ■ phone settings ■ navigation settings ...
Page 110
Instruments and controls 109 ■ comfort settings chime volume: change the volume of warning chimes. Rear auto wipe in reverse: activate or deactivate automatic switching on of the rear window wiper when reverse gear is engaged. ■ park assist / collision detection park assist: activate or deactivate t...
Page 111
110 lighting lighting exterior lighting .......................... 110 interior lighting ........................... 115 lighting features ........................ 117 exterior lighting light switch turn light switch: auto = automatic light control: exterior lighting is switched on and off automatic...
Page 112
Lighting 111 automatic light control when the automatic light control function is switched on and the engine is running, the system switches between daytime running light and low beam depending on the lighting conditions. Daytime running light daytime running light increases visibility of the vehicl...
Page 113
112 lighting 0 = front seats occupied 1 = all seats occupied 2 = all seats occupied and load compartment laden 3 = driver's seat occupied and load compartment laden. Headlights when driving abroad the asymmetrical headlight beam extends visibility at the edge of the road on the front passenger side....
Page 114
Lighting 113 3. Switch on ignition. 4. After approx. 5 seconds the control indicator f starts flashing and an acoustic signal sounds. Control indicator f 3 95. Every time the ignition is switched on, control indicator f flashes as a reminder for approx. 4 seconds. For deactivation, operate the same ...
Page 115
114 lighting turn and lane-change signals lever up = right turn signal lever down = left turn signal if the lever is moved past the resistance point, the turn signal is switched on constantly. When the steering wheel moves back, the turn signal is automatically deactivated. For three flashes, e.G. W...
Page 116
Lighting 115 parking lights when the vehicle is parked, the parking lights on one side can be activated: 1. Switch off ignition. 2. Move turn signal lever all the way up (right parking lights) or down (left parking lights). Confirmed by a signal and the corresponding turn signal control indicator. R...
Page 117
116 lighting on vehicles with light sensor the brightness can only be adjusted when the exterior lights are on and the light sensor detects night conditions. Interior lights during entry and exit of the vehicle, the front and rear courtesy lights automatically switch on and then off after a delay. N...
Page 118
Lighting 117 lighting features centre console lighting spotlight incorporated in the interior lighting comes on when the low beam is switched on. Entry lighting welcome lighting the exterior lights, instrument panel light and interior lights are switched on for a short time by pressing the unlocking...
Page 119
118 lighting activation, deactivation and duration of this function can be changed in the menu settings in the info-display. Vehicle personalisation 3 106. The settings can be saved for the key being used 3 21. Battery discharge protection switching off electric lights to prevent discharge of the ba...
Page 120
Climate control 119 climate control climate control systems ............. 119 air vents ..................................... 125 maintenance .............................. 126 climate control systems heating and ventilation system controls for: ■ temperature ■ air distribution ■ fan speed ■ demisti...
Page 121
120 climate control note if the settings for demisting and defrosting are selected, an autostop will be inhibited. If the settings for demisting and defrosting are selected while the engine is in an autostop, the engine will restart automatically. Stop-start system 3 130. Air conditioning system in ...
Page 122
Climate control 121 ■ set fan speed to highest level. ■ open all vents. Demisting and defrosting the windows v ■ press button v: fan automatically switches to higher speed, the air distribution is directed towards the windscreen. ■ switch cooling n on. ■ set temperature control to warmest level. ■ s...
Page 123
122 climate control the preselected temperature is automatically regulated. In the automatic mode the fan speed and air distribution automatically regulate the air flow. The system can be manually adapted via the use of air distribution and air flow controls. Each change of settings is shown in the ...
Page 124
Climate control 123 if the minimum temperature is set, the climate control system runs at maximum cooling, if cooling n is switched on. If the maximum temperature is set, the climate control system runs at maximum heating. Note if the temperature is set to lo or hi, an autostop will be inhibited. If...
Page 125
124 climate control s = to windscreen and front door windows m = to head area via adjustable air vents k = to foot well all combinations are possible. Return to automatic air distribution: deactivate corresponding setting or press button auto. Cooling activate or deactivate with the n button. The ai...
Page 126
Climate control 125 auxiliary heater air heater quickheat is an electric auxiliary air heater which automatically warms up the passenger compartment more quickly. Air vents adjustable air vents to open the vent, turn the adjuster wheel to the right. Adjust the air amount at the vent outlet by turnin...
Page 127
126 climate control maintenance air intake the air intake in front of the windscreen in the engine compartment must be kept clear to allow air intake. Remove any leaves, dirt or snow. Pollen filter cabin air filtration a particle filter cleans the cabin air from dust, soot, pollen and spores. Active...
Page 128
Driving and operating 127 driving and operating driving hints ............................... 127 starting and operating ............... 128 engine exhaust .......................... 132 automatic transmission .............. 134 manual transmission .................. 137 brakes ........................
Page 129
128 driving and operating starting and operating new vehicle running-in do not brake unnecessarily hard for the first few journeys. During the first drive, smoke may occur because of wax and oil evaporating off the exhaust system. Park the vehicle in the open for a while after the first drive and av...
Page 130
Driving and operating 129 diesel engine: turn the key to position 2 for preheating until control indicator ! Extinguishes. Turn the key briefly to position 3 and release: an automatic procedure operates the starter with a short delay as long as the engine is running, see automatic starter control. B...
Page 131
130 driving and operating stop-start system the stop-start system helps to save fuel and to reduce the exhaust emissions. When conditions allow, it switches off the engine as soon as the vehicle is at a low speed or at a standstill, e.G. At a traffic light or in a traffic jam. It starts the engine a...
Page 132
Driving and operating 131 ■ the stop-start system is not manually deactivated ■ the bonnet is fully closed ■ the driver's door is closed or the driver's seat belt is fastened ■ the battery is sufficiently charged and in good condition ■ the engine is warmed up ■ the engine coolant temperature is not...
Page 133
132 driving and operating ■ the driver's seat belt is unfastened and the driver's door is opened ■ the engine temperature is too low ■ the battery is discharged ■ the brake vacuum is not sufficient ■ the vehicle starts to move ■ the climate control system requests an engine start ■ the air condition...
Page 134
Driving and operating 133 take up to 25 minutes. Typically it needs between 7 and 12 minutes. Autostop is not available and fuel consumption may be higher during this period. The emission of smells and smoke during this process is normal. Under certain driving conditions, e.G. Short distances, the s...
Page 135
134 driving and operating rectified by a workshop as soon as possible. In an emergency, driving can be continued for a short period, keeping vehicle speed and engine speed low. Automatic transmission the automatic transmission permits automatic gearshifting (automatic mode) or manual gearshifting (m...
Page 136
Driving and operating 135 without brake pedal applied, the control indicator j illuminates. If the selector lever is not in p when the ignition is switched off, the control indicator j and p flash. To engage p or r, press the release button. The engine can only be started with the lever in position ...
Page 137
136 driving and operating in manual mode no automatic shifting to a higher gear takes place at high engine revolutions. Electronic driving programmes ■ following a cold start, the operating temperature programme increases engine speed to quickly bring the catalytic converter to the required temperat...
Page 138
Driving and operating 137 5. Insert a screwdriver into the opening as far as it will go and move the selector lever out of p or n. If p or n is engaged again, the selector lever will be locked in position again. Have the cause of the power supply interruption remedied by a workshop. 6. Mount the sel...
Page 139
138 driving and operating brakes the brake system comprises two independent brake circuits. If a brake circuit fails, the vehicle can still be braked using the other brake circuit. However, braking effect is achieved only when the brake pedal is depressed firmly. Considerably more force is needed fo...
Page 140
Driving and operating 139 parking brake electrical parking brake applying when vehicle is stationary pull switch m for approx. One second, the electrical parking brake operates automatically with an adequate force. For maximum force, e.G. Parking with trailer or on inclines, pull switch m twice. The...
Page 141
140 driving and operating control indicator m flashes: electrical parking brake is not fully applied or released. When continuously flashing, release electrical parking brake and retry applying. Brake assist if the brake pedal is depressed quickly and forcefully, maximum brake force is automatically...
Page 142
Driving and operating 141 9 warning do not let this special safety feature tempt you into taking risks when driving. Adapt speed to the road conditions. Control indicator b 3 93. Deactivation tc can be switched off when spinning of drive wheels is required: press button b briefly. Control indicator ...
Page 143
142 driving and operating esc is reactivated by pressing the b button again. If the tc system was previously disabled, both tc and esc are reactivated. Esc is also reactivated the next time the ignition is switched on. Driver assistance systems cruise control the cruise control can store and maintai...
Page 144
Driving and operating 143 increase speed with cruise control active, hold thumb wheel turned to res/+ or briefly turn to res/+ repeatedly: speed increases continuously or in small increments. Alternatively accelerate to the desired speed and store by turning to res/+. Reduce speed with cruise contro...
Page 145
144 driving and operating activation when reverse gear is engaged, the system is activated automatically. The front parking assist can also be activated at a low speed by pressing the r button. An illuminated led in the parking assist button indicates that the system is ready to operate. Indication ...
Page 146
Driving and operating 145 caution performance of the sensors can be reduced when sensors are covered, e.G. By ice or snow. Performance of the parking assist systems can be reduced due to heavy loading. Special conditions apply if there are taller vehicles involved (e.G. Off-road vehicles, mini vans,...
Page 147
146 driving and operating the camera is mounted in the tailgate handle and has a viewing angle of 130°. Due to the high position of the camera the rear bumper can be seen on the display as a guide to position. The area displayed by the camera is limited. The distance of the image that appears on the...
Page 148
Driving and operating 147 activation or deactivation of the rear view camera can be changed in the menu settings in the info-display. Vehicle personalisation 3 106. Fault fault messages are displayed with a 9 on the top line of the info-display. The rear view camera may not operate properly when: ■ ...
Page 149
148 driving and operating caution use of fuel that does not comply to en 590 or similar can lead to engine powerloss, increased wear or engine damage and may affect your warranty. Do not use marine diesel oils, heating oils, aquazole and similar diesel- water emulsions. Diesel fuels must not be dilu...
Page 150
Driving and operating 149 fill the tank completely at regular intervals to prevent corrosion in the tank. Faults and remedies if gas mode is not possible, check the following: ■ is there enough liquid gas present? ■ is there enough petrol present for starting? Due to extreme temperatures in combinat...
Page 151
150 driving and operating refuelling 9 danger before refuelling, switch off engine and any external heaters with combustion chambers. Switch off any mobile phones. Follow the operating and safety instructions of the filling station when refuelling. 9 danger fuel is flammable and explosive. No smokin...
Page 152
Driving and operating 151 the fuel filler cap can be retained in the bracket on the fuel filler flap. For refuelling, fully insert the pump nozzle and switch it on. After automatic cut-off, it can be topped up with max. Two doses of fuel. Caution wipe off any overflowing fuel immediately. To close, ...
Page 153
152 driving and operating acme adapter: screw the nut of the filling nozzle onto the adapter. Press locking lever on filler nozzle down. Dish (italy) filler neck: place the filler nozzle into the adapter. Press locking lever on filler nozzle down. Bayonet filler neck: place filler nozzle on the adap...
Page 154
Driving and operating 153 euro adapter: spain dish (italy) adapter: bosnia- herzegovina, bulgaria, denmark, estonia, france, greece, italy, croatia, latvia, lithuania, macedonia, austria, poland, portugal, romania, sweden, switzerland, serbia, slovakia, slovenia, czech republic, turkey, ukraine, hun...
Page 155
154 driving and operating towing general information only use towing equipment that has been approved for your vehicle. Entrust retrofitting of towing equipment to a workshop. It may be necessary to make changes that affect the cooling system, heat shields or other equipment. Fitting of towing equip...
Page 156
Driving and operating 155 the permissible gross train weight must not be exceeded. This weight is specified on the identification plate 3 206. Vertical coupling load the vertical coupling load is the load exerted by the trailer on the coupling ball. It can be varied by changing the weight distributi...
Page 157
156 driving and operating fitting the detachable coupling ball bar disengage and fold down the socket. Remove the sealing plug from the opening for the coupling ball bar and stow it. Checking the tensioning of the coupling ball bar ■ red marking on rotary knob must point towards green marking on cou...
Page 158
Driving and operating 157 insert the tensioned coupling ball bar in the opening and push firmly upwards until it audibly engages. The rotary handle snaps back into its original position resting against the coupling ball bar without a gap. 9 warning do not touch rotary handle during insertion. Lock t...
Page 159
158 driving and operating open the protective flap and turn the key clockwise to unlock the coupling ball bar. Pull out rotary handle and turn clockwise as far as it will go. Pull out coupling ball bar downwards. Insert sealing plug in opening. Fold away socket..
Page 160
Vehicle care 159 vehicle care general information ................... 159 vehicle checks ........................... 160 bulb replacement ....................... 167 electrical system ........................ 177 vehicle tools .............................. 182 wheels and tyres ........................
Page 161
160 vehicle care ■ open the bonnet, close all doors and lock the vehicle. ■ disconnect the clamp from the negative terminal of the vehicle battery. Beware that all systems are not functional, e.G. Anti-theft alarm system. Putting back into operation when the vehicle is to be put back into operation:...
Page 162
Vehicle care 161 9 danger the ignition system uses extremely high voltage. Do not touch. Bonnet opening pull the release lever and return it to its original position. Press the safety catch and open the bonnet. Secure the bonnet support. If the bonnet is opened during an autostop, the engine will be...
Page 163
162 vehicle care different dipsticks are used depending on engine variant. When the engine oil level has dropped to the min mark, top up engine oil. We recommend the use of the same grade of engine oil that was used at last change. The engine oil level must not exceed the max mark on the dipstick. C...
Page 164
Vehicle care 163 if the cooling system is cold, the coolant level should be above the filling line mark. Top up if the level is low. 9 warning allow the engine to cool before opening the cap. Carefully open the cap, relieving the pressure slowly. To top up use a 1:1 mixture of approved coolant conce...
Page 165
164 vehicle care the brake fluid level must be between the min and the max marks. When topping up, ensure maximum cleanliness as contamination of the brake fluid can lead to brake system malfunctions. Have the cause of the loss of brake fluid remedied by a workshop. Only use high-performance brake f...
Page 166
Vehicle care 165 an agm battery can be identified by the label on the battery. We recommend the use of an original vauxhall battery. Note using an agm battery different from the original vauxhall battery might result in a lower performance of the stop-start system. 9 warning when fitting a battery w...
Page 167
166 vehicle care meaning of symbols: ■ no sparks, naked flames or smoking. ■ always shield eyes. Explosive gases can cause blindness or injury. ■ keep the battery out of reach of children. ■ the battery contains sulfuric acid which could cause blindness or serious burn injuries. ■ see the owner’s ma...
Page 168
Vehicle care 167 bulb replacement switch off the ignition and switch off the relevant switch or close the doors. Only hold a new bulb at the base! Do not touch the bulb glass with bare hands. Use only the same bulb type for replacement. Replace headlight bulbs from within the engine compartment. Hal...
Page 169
168 vehicle care 3. Detach the bulb from the bulb holder and replace the bulb. 4. Insert the bulb holder into the reflector. 5. Fit the cap and rotate clockwise. High beam 1. Rotate the cap 2 anticlockwise and remove it. 2. Detach the plug from the bulb. 3. Disengage the spring clip and then swivel ...
Page 170
Vehicle care 169 2. Detach bulb from the bulb holder and replace it. 3. Insert the bulb holder into the reflector and rotate clockwise. Front turn signal 1. Rotate the bulb holder anticlockwise and remove it. 2. Rotate bulb anticlockwise and remove from bulb holder. 3. Replace bulb. 4. Insert the bu...
Page 171
170 vehicle care low beam/high beam 1. Rotate the cap 1 anticlockwise and remove it. 2. Push the bulb holder downwards and withdraw the bulb holder from the reflector. 3. Detach the bulb from the bulb holder and replace the bulb. 4. Insert the bulb holder into the reflector. 5. Fit the cap and rotat...
Page 172
Vehicle care 171 2. Press catch and withdraw the bulb holder from the reflector. 3. Remove and replace the bulb. 4. Press catch and insert the bulb holder into the reflector. 5. Fit the cap and rotate clockwise. Cornering light 1. Rotate protective cover 2 anticlockwise and remove. 2. Detach the plu...
Page 173
172 vehicle care 1. Turn the bulb holder anticlockwise and remove it from the reflector. 2. Disengage the bulb holder from the plug connector by pressing the retaining lug. 3. Remove and replace the bulb holder with bulb. 4. Attach the plug connector. 5. Insert the bulb holder into the reflector. 6....
Page 174
Vehicle care 173 3. Carefully withdraw the light assembly from retaining pins and remove. Make sure that the cable duct remains in position. 4. Detach the wiring plug from the bulb carrier. 5. Unlatch the four retaining lugs and remove the bulb carrier. 6. Remove and replace the bulb. Tail light and...
Page 175
174 vehicle care 2. Press the retaining lug and remove the bulb carrier downwards. 3. To replace the reverse light bulb (1), remove and replace the bulb to replace the tail light bulb (2), push the bulb slightly into the socket, rotate anticlockwise, remove and replace the bulb. 4. Insert the bulb c...
Page 176
Vehicle care 175 4. Insert bulb holder and turn clockwise. 5. On left side: insert front end into front wing, slide forward and insert rear end. On right side: insert rear end into front wing, slide rearward and insert front end. Number plate light 1. Insert screwdriver in recess of the cover, press...
Page 177
176 vehicle care puddle lights 1. Disengage the housing at the bottom and remove it. 2. Press the retaining lug and withdraw the connector. 3. Rotate the bulb holder clockwise and remove. 4. Pull the bulb out of the bulb holder and replace it. 5. Insert the bulb holder into the housing and turn it a...
Page 178
Vehicle care 177 electrical system fuses data on the replacement fuse must match the data on the defective fuse. There are three fuse boxes in the vehicle: ■ in the front left of the engine compartment, ■ in left-hand drive vehicles, in the interior behind the storage compartment, or, in right-hand ...
Page 179
178 vehicle care place the fuse extractor on the various types of fuse from the top or side, and withdraw fuse. Engine compartment fuse box the fuse box is in the front left of the engine compartment. Disengage the cover, lift it upwards and remove. After having changed defective fuses close the fus...
Page 180
Vehicle care 179 no. Circuit 1 starter 2 – 3 fuel filter, cooling 4 horn 5 terminal 30 6 engine control module, trans‐ mission control unit 7 fog light 8 engine cooling 9 engine cooling 10 vacuum pump 11 ignition, preheating 12 headlamp levelling 13 air conditioning system, terminal 15 14 transmissi...
Page 181
180 vehicle care no. Circuit 22 electrical parking brake 23 tyre repair kit 24 fuel pump 25 abs 26 heated rear window 27 abs 28 interior fan 29 cigarette lighter 30 air conditioning system 31 front power window, left 32 front power window, right 33 mirror heating 34 abs 35 airbag instrument panel fu...
Page 182
Vehicle care 181 no. Circuit 1 radio 2 display, instrument, telephone 3 radio 4 ignition switch, immobiliser 5 windscreen washer, rear screen washer 6 central locking system, tailgate 7 central locking system 8 display, instrument, telephone 9 heated steering wheel 10 rear left door unlocking 11 rea...
Page 183
182 vehicle care no. Circuit 1 adaptive forward lighting 2 – 3 – 4 – 5 – 6 rear power window, right 7 adaptive forward lighting 8 trailer module, trailer socket 9 seat, lumbar support, left 10 rear power window, left 11 park assist 12 electrical sunblind 13 – 14 heated front seats 15 trailer module ...
Page 184
Vehicle care 183 vehicles with tyre repair kit to open the compartment, disengage the cover and open it. The vehicle tools are in the right-hand compartment in the load compartment, together with the tyre repair kit. Wheels and tyres tyre condition, wheel condition drive over edges slowly and at rig...
Page 185
184 vehicle care tyre designations e.G. 195/65 r 15 91 h 195 = tyre width, mm 65 = cross-section ratio (tyre height to tyre width), % r = belt type: radial rf = type: runflat 15 = wheel diameter, inches 91 = load index e.G. 91 is equivalent to 615 kg h = speed code letter speed code letter: q = up t...
Page 186
Vehicle care 185 system initialisation after tyre pressure correction or wheel change, the system must be initiated: 1. Apply electrical parking brake. 2. Press the menu button to select the vehicle information menu. 3. Turn the adjuster wheel to select tire pressure system. 4. Press the set/clr but...
Page 187
186 vehicle care changing tyre and wheel size if tyres of a different size than those fitted at the factory are used, it may be necessary to reprogramme the speedometer as well as the nominal tyre pressure and make other vehicle modifications. After converting to a different tyre size, have the labe...
Page 188
Vehicle care 187 tyre damage exceeding 4 mm or that is at the tyre's sidewall near the rim cannot be repaired with the tyre repair kit. 9 warning do not drive faster than 50 mph. Do not use for a lengthy period. Steering and handling may be affected. If you have a flat tyre: apply the parking brake ...
Page 189
188 vehicle care 3. Position the sealant bottle on the bracket. Make sure that the bottle does not fall. 4. Unscrew valve cap from defective tyre. 5. Screw tyre inflation hose to valve. 6. Screw air hose onto compressor connection. 7. Switch on ignition. To avoid discharging the battery, we recommen...
Page 190
Vehicle care 189 12. Push catch on bracket to remove sealant bottle from bracket. Screw the tyre inflation hose to the free connection of the sealant bottle. This prevents sealant from escaping. Stow tyre repair kit in load compartment. 13. Remove any excess sealant using a cloth. 14. Take the label...
Page 191
190 vehicle care ■ if the ground on which the vehicle is standing is soft, a solid board (max. 1 cm thick) should be placed under the jack. ■ no people or animals may be in the vehicle when it is jacked-up. ■ never crawl under a jacked-up vehicle. ■ do not start the vehicle when it is raised on the ...
Page 192
Vehicle care 191 3. Ensure the jack is positioned correctly with the vehicle jacking points. Lifting the vehicle onto a lifting platform: position the rear arm of the lifting platform at the underbody. Position the front arm of the lifting platform at the underbody. 4. Variant 1: set the jack to the...
Page 193
192 vehicle care set the jack to the necessary height. Position it directly below the jacking point in a manner that prevents it from slipping. Attach wheel wrench and with the jack correctly aligned rotate wheel wrench until wheel is clear of the ground. 5. Unscrew the wheel bolts. 6. Change the wh...
Page 194
Vehicle care 193 the spare wheel is located in the load compartment beneath the floor covering. It is secured with a wing nut. The spare wheel well is not designed for all permissible tyre sizes. If a wheel wider than the spare wheel has to be stowed in the load compartment, it needs to be secured w...
Page 195
194 vehicle care ■ take the extension bar from the tool box and screw it on the bolt. ■ store the damaged wheel and secure it by turning the wing nut clockwise. The floor cover can be placed on the projecting wheel. Remove the extension bar before fitting the spare wheel in the well after renewing o...
Page 196
Vehicle care 195 jump starting do not start with quick charger. A vehicle with a discharged battery can be started using jump leads and the battery of another vehicle. 9 warning be extremely careful when starting with jump leads. Any deviation from the following instructions can lead to injuries or ...
Page 197
196 vehicle care 3. Connect the black lead to the negative terminal of the booster battery. 4. Connect the other end of the black lead to a vehicle grounding point, such as the engine block or an engine mounting bolt. Connect as far away from the discharged battery as possible, however at least 60 c...
Page 198
Vehicle care 197 screw in the towing eye as far as it will go until it stops in a horizontal position. Attach a tow rope – or better still a tow rod – to the towing eye. The towing eye must only be used for towing and not for recovering the vehicle. Caution activate the child lock in both rear doors...
Page 199
198 vehicle care screw in the towing eye as far as it will go until it stops in a horizontal position. The lashing eye at the rear underneath the vehicle must never be used as a towing eye. Attach a tow rope – or even better a tow bar – to the towing eye. The towing eye must only be used for towing ...
Page 200
Vehicle care 199 if using a vehicle wash, comply with the vehicle wash manufacturer's instructions. The windscreen wiper and rear window wiper must be switched off. Remove antenna and external accessories such as roof racks etc. If you wash your vehicle by hand, make sure that the insides of the whe...
Page 201
200 vehicle care clean rims with a ph-neutral wheel cleaner. Rims are painted and can be treated with the same agents as the body. Paintwork damage rectify minor paintwork damage with a touch-up pen before rust forms. Have more extensive damage or rust areas repaired by a workshop. Underbody some ar...
Page 202
Vehicle care 201 caution close velcro fasteners as open velcro fasteners on clothing could damage seat upholstery. The same applies to clothing with sharp-edged objects, like zips or belts or studded jeans. Plastic and rubber parts plastic and rubber parts can be cleaned with the same cleaner as use...
Page 203
202 service and maintenance service and maintenance general information ................... 202 recommended fluids, lubricants and parts .................................... 203 general information service information in order to ensure economical and safe vehicle operation and to maintain the value...
Page 204
Service and maintenance 203 make sure that the service and warranty booklet is completed correctly as continuous proof of service is essential if any warranty or goodwill claims are to be met, and is also a benefit when selling the vehicle. Service interval with remaining engine oil life duration th...
Page 205
204 service and maintenance select the appropriate engine oil based on its quality and on the minimum ambient temperature 3 207. Additional engine oil additives the use of additional engine oil additives could cause damage and invalidate the warranty. Engine oil viscosity grades the sae viscosity gr...
Page 206
Technical data 205 technical data vehicle identification .................. 205 vehicle data ............................... 207 vehicle identification vehicle identification number the vehicle identification number is stamped on the identification plate and on the floor pan, under the floor coverin...
Page 207
206 technical data identification plate the identification plate is located on the rear right-hand door frame. Information on identification label: 1 = manufacturer 2 = type approval number 3 = vehicle identification number 4 = permissible gross vehicle weight rating in kg 5 = permissible gross trai...
Page 208
Technical data 207 vehicle data recommended fluids and lubricants european service schedule required engine oil quality all european countries (except belarus, moldova, russia, serbia, turkey) only israel engine oil quality petrol engines (including cng, lpg, e85) diesel engines petrol engines (incl...
Page 209
208 technical data international service schedule required engine oil quality all countries outside europe except israel only belarus, moldova, russia, serbia, turkey engine oil quality petrol engines (including cng, lpg, e85) diesel engines petrol engines (including cng, lpg, e85) diesel engines de...
Page 210
Technical data 209 all countries outside europe except israel only belarus, moldova, russia, serbia, turkey engine oil quality petrol engines (including cng, lpg, e85) diesel engines petrol engines (including cng, lpg, e85) diesel engines acea a3/b3 ✔ – ✔ – acea a3/b4 ✔ ✔ ✔ ✔ acea c3 ✔ ✔ ✔ ✔ api sm ...
Page 211
210 technical data engine data sales designation 1.4 1.4 1.4 1.4 1.4 1.3 engine identifier code a14xer a14nel b14nel b14net a14net a13dtc number of cylinders 4 4 4 4 4 4 piston displacement [cm 3 ] 1398 1364 1364 1364 1364 1248 engine power [kw] 74 88 88 103 103 55 at rpm 6000 4800-6000 4200-6000 49...
Page 212
Technical data 211 sales designation 1.3 1.7 1.7 1.7 1.7 engine identifier code a13dte a17dt a17dtc a17dts a17dti number of cylinders 4 4 4 4 4 piston displacement [cm 3 ] 1248 1686 1686 1686 1686 engine power [kw] 70 74 81 96 81 at rpm 4000 4000 4000 4000 3600 torque [nm] 180 260 280 300 280 at rpm...
Page 213
212 technical data performance engine a14xer a14nel b14nel a14net b14net a13dtc maximum speed 4) [mph] manual transmission 110 117 5) – 122 – 99 automatic transmission – – 115 – 6) – engine a13dte a17dt a17dtc a17dts a17dti maximum speed 7) [mph] manual transmission 104 – 113 122 – automatic transmi...
Page 214
Technical data 213 vehicle weight kerb weight, basic model without any optional equipment engine manual transmission automatic transmission without/with air conditioning [kg] a14xer 1361/1376 – a14nel 1393 8) /1408 8) – b14nel – 1471/1486 a14net 1393/1408 – b14net – 1471/1486 a13dtc 1393/1408 – a13d...
Page 215
214 technical data kerb weight, basic model with all optional equipment engine manual transmission automatic transmission without/with air conditioning [kg] a14xer –/1571 – a14nel –/1613 – b14nel – –/1664 a14net –/1613 – b14net – –/1664 a13dtc –/1613 – a13dte –/1471 – a17dt – –/1733 a17dtc –/1664 9)...
Page 216
Technical data 215 vehicle dimensions length [mm] 4288 width without exterior mirrors [mm] 1812 width with two exterior mirrors [mm] 1994 height (without antenna) [mm] 1615 length of load compartment floor [mm] 815 length of load compartment with folded rear seats [mm] 1642 load compartment width [m...
Page 217
216 technical data capacities engine oil engine a14xer a14nel b14nel a14net b14net a13dtc including filter [l] 4.0 4.0 4.0 4.0 4.0 3.5 between min and max [l] 1.0 1.0 1.0 1.0 1.0 1.0 engine a13dte a17dt a17dtc a17dts a17dti including filter [l] 3.5 5.4 5.4 5.4 5.4 between min and max [l] 1.0 1.0 1.0...
Page 218
Technical data 217 tyre pressures comfort with up to 3 people eco with up to 3 people with full load engine tyres front rear front rear front rear [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) a14xer 195/65 r15, 230/2.3 (33) 210/2.1 (30) ...
Page 219
218 technical data comfort with up to 3 people eco with up to 3 people with full load engine tyres front rear front rear front rear [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) a14net, b14net 205/55 r16, 230/2.3 (33) 210/2.1 (30) 280/2.8...
Page 220
Technical data 219 comfort with up to 3 people eco with up to 3 people with full load engine tyres front rear front rear front rear [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) [kpa/bar] ([psi]) a17dt, a17dtc, a17dts, a17dti 195/65 r15 12)13) , 250/2.5 (3...
Page 221
220 customer information customer information vehicle data recording and privacy ....................................... 220 vehicle data recording and privacy event data recorders data storage modules in the vehicle a large number of electronic components of your vehicle contain data storage module...
Page 222
Customer information 221 when using the vehicle, situations may occur in which these technical data related to other information (accident report, damages on the vehicle, witness statements etc.) may be associated with a specific person - possibly, with the assistance of an expert. Additional functi...
Page 223
222 index a accessories and vehicle modifications .......................... 159 active head restraints................... 35 adaptive brake light.................... 138 adaptive forward lighting .......... .................................. 95, 113, 169 adjustable air vents ................... 125...
Page 224
223 child restraints.............................. 52 child restraint systems ................ 52 cigarette lighter ........................... 84 climate control ............................. 15 climate control, service.............. 126 climate control systems............. 119 clock..................
Page 225
224 fuse box..................................... 178 fuses ......................................... 177 g gauges......................................... 85 general information ................... 154 glovebox ..................................... 58 graphic-info-display, colour- info-display .......
Page 226
225 oil............................................... 161 oil, engine.......................... 203, 207 oil pressure.................................. 94 outside temperature .................... 82 overrun cut-off ........................... 129 p parking ................................ 17, 132 p...
Page 227
226 towing another vehicle ............. 197 towing a trailer........................... 154 towing equipment ..................... 155 towing the vehicle ..................... 196 traction control system ............. 140 traction control system off........... 93 trailer coupling......................