1. DL manuals
  2. Vax
  3. Vacuum Cleaner
  4. UCNBAWC1
  5. Let's get started

Vax UCNBAWC1 Let's get started

Manual is about: PowerNano CYCLONIC BAGLESS UPRIGHT VACUUM

Summary of UCNBAWC1

  • Page 1

    Let’s get started. Cyclonic bagless upright vacuum ucnbawp1 ucnbawh1 ucnbawc1 powernano.

  • Page 2: Let’S Talk Safety

    Let’s talk safety basic safety precautions don’ts do’s this vacuum cleaner is intended for household use only and not for commercial or industrial use. • only use the vacuum cleaner indoors on dry surfaces and keep the area you’re cleaning well lit. • keep fingers, hair and loose clothing from movin...

  • Page 3

    • this vacuum cleaner is not to be used by children under eight years or persons with reduced physical, sensory or mental capabilities, unless they have been given instructions on how to use the machine or are supervised during use. Any cleaning or maintenance of your vacuum cleaner should not be ma...

  • Page 4: @vaxuk

    Thank you for buying this power nano. Taking care of your carpets and hard floors the power nano is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and ha...

  • Page 5: Contents

    Let’s talk safety getting to know your machine getting started using your machine taking care of your machine let’s talk technical accessories what to do if it goes wrong getting in touch notes initial setup for normal operation 1. Use the base accessories. A. Shortest hose. B. Extension tube set to...

  • Page 6: Technical Specification

    Getting to know your machine name power nano voltage 220-240v wattage 850w weight 5.25kg technical specification subject to technical change without notice. To purchase consumables and accessories, please visit vax.Co.Uk extension tube and crevice tool handle release button dust brush holder handle ...

  • Page 7: Getting Started

    Getting started assembling your vacuum cleaner lift the handle up and click into place. Line up the latch on the accessory hose, push until it clicks into place. Push the accessory hose into the hose to machine connector. Before you begin cleaning caution: always switch off the vacuum cleaner before...

  • Page 8: Using Your Machine

    Using your machine important: always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/ attachments, or removing and emptying the dirt container. The accessories can be attached to the extension tube or directly to the hose. When using accessories on the hose/exten...

  • Page 9: Using Your Machine

    Using your machine hard floor cleaning hard floor adaptor. Line up the hard floor adaptor with the base of the vacuum cleaner. Push until it clicks into place. Lie the vacuum cleaner on its back exposing the brushbar. Hold the vacuum cleaner with the brushbar over the tread of the stairs. Using on t...

  • Page 10: Taking Care of Your Machine

    Taking care of your machine press the dirt container release button, pull to remove. Emptying the dirt container cleaning the carbon pre-motor filter hold the dirt container over a bin. Press the dirt release clip, allowing dirt/debris to fall out. Turn the dirt container lid anti- clockwise and lif...

  • Page 11: Taking Care of Your Machine

    Taking care of your machine cleaning the separator lift the separator out of the dirt container. Using a soft brush clean any dirt/debris out of the separator. Tap the separator over a bin to remove any dirt/debris. Line up the tabs on the separator with the dirt container and slide the separator in...

  • Page 12: Taking Care of Your Machine

    Remove the hose end from the hose to machine connector. Wrap the hose around the hose guide. Attach the accessory hose to the extension hose. Insert the hose into the hose to machine connector. Bring the hose over and behind the carry handle. Taking care of your machine storing the extension hose on...

  • Page 13: Let’S Talk Technical

    Using a pair of scissors, remove any threads or hair caught around the brushbar. Remove the hose end from the hose to machine connector. Lift the clip under the hose inlet. Pull the latch out and remove the hose. Let’s talk technical removing debris from the brushbar important: unplug and switch off...

  • Page 14: Let’S Talk Technical

    Let’s talk technical replacing the belt lie the vacuum cleaner on its back exposing the brushbar. Use a cross head screwdriver to undo the 5 screws. Lift to remove the brushbar cover. Lift to remove the brushbar. Remove and dispose of the old belt. Place the belt on the rounded area of the brushbar ...

  • Page 15: Accessories

    Accessories don’t forget your accessories! Order at: www.Vax.Co.Uk/spares-and-solutions pro cleaning kit (type 2) 1-1-133326 all our best tools in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as o...

  • Page 16: What To Do If It Goes Wrong

    • check the contents on the back of the box to make sure the part is included with your vacuum cleaner. • the plug may not be fully pushed into the electrical socket. • check the fuse in the plug. If this needs replacing, always replace with a british 13amp fuse. • the motor thermostat may have trip...

  • Page 17: Getting In Touch

    † registration required. Terms and conditions apply, see vax.Co.Uk for details. * calls are charged at the uk local rate. Please make a note of the serial number and model number of the product before calling. Getting in touch.

  • Page 18: Notes

    Notes notes.

  • Page 19: Notes

    Notes notes.

  • Page 20: Get In Touch

    Eu statement of compliance: manufacturer/eu importer: vax limited, hereby on our own responsibility, declare that the ucnbawp1/ucnbawh1/ucnbawc1 are manufactured in compliance with the following directives: safety: 2014/35/eu low voltage directive. Emc: 2014/30/eu electromagnetic compatibility direc...