Vax UCNBAWC1 Let's get started - Let’S Talk Technical
Manual is about: PowerNano
CYCLONIC BAGLESS
UPRIGHT VACUUM
of
20
Using a pair of scissors, remove
any threads or hair caught
around the brushbar.
Remove the hose end from the
hose to machine connector.
Lift the clip under
the hose inlet.
Pull the latch out and
remove the hose.
Let’s talk technical
Removing debris from the brushbar
IMPORTANT: Unplug and switch off the vacuum cleaner before performing maintenance or troubleshooting checks.
To reassemble, line up the latch on the
accessory hose and push until it clicks
into place. Push the other end of the
hose into the hose to machine connector.
Removing a blockage from the hose
TIP
Test for blockages by dropping a
small ball of paper through the
hose. Remove any blockage
by inserting wire.
Insert a broom handle or
similar blunt instrument into
the hose to remove blockage.